Filter By:

  • Show More Brands

  • Show Fewer Brands

Cranksets

Shimano Dura-Ace 9100 11-Speed Crankset
$779.99
- Optimum Power Transfer - Best Balance For Lighter Weight (-7G) And Efficiency - New Designed Crank Arm - Maintains High Rigidity And Reduces Weight - Hollowglide - 4-Arm Construction Crankset - Adapted For Race Specific Disc Brake System - Shorter Length Of Rear Center With O.L.D. 135mm - Redesign The Gear Teeth Profile To Fit Wider Gear Pitch - 50-34T/53-39T/54-42T/55-42T/52-36T - Iconic Design - Chain Line: 43.5
Shimano Altus M361-L Crankset
$80.99 - $84.99
Shimano Acera FC-M361 cranksets feature sturdy construction, reliable shifting, and replaceable chainrings. - Spindle Interface type: Square Taper JIS
Campagnolo Record 12x2 Speed Crankset
$739.00 - $740.00
The new Record 12x2 Speed crankset: a new hole-free design for the right-hand crank that optimizes aerodynamics. The new carbon fiber Record 12x2 Speed crankset with unidirectional finishing guarantees continuity with the finishing of the entire groupset, whilst maintaining the Ultra-Torque bracket system on the steel axle to ensure perfect transmission of power. The new Record 12x2 Speed crankset can be installed on any type of frame, whether or not it is being used with disc brakes because it optimizes the chain line on the frame with a rear hub flange measuring 130, 135 or 142 millimeters without affecting the Q factor that remains constant at 145.5 millimeters. The innovative design of the outer chainring ensures faster, quieter derailing owing to the contoured pin. The symmetrical design of the inner chainring teeth allows improved stability with chain crossovers. The double wheel sizing standards (112 and 145 millimeters) enable reducing the weight through greater use of carbon fiber. There are eight fixing screws for increased structural stiffness. The varying number of pins for each of the three chainring combinations (34/50, 36/52, 39/53) facilitates upshifting due to the optimized free strokes associated with each combination. The special drains on the inside of the outer chainrings optimize performance when downshifting in dead spots.
Shimano Deore XT Crank Arms
$174.99 - $176.99
- Aluminum crank arm and spider with steel spindle - 4 bolt spider compatible with all XT 8000 series chainring configurations - Hollowtech II crank arm construction - Steel driving gear teeth and aluminum support gears - 96mm P.C.D. - 176 Q-Factor, 53.4mm OR 50mm chainline - BB Included: No - Chainrings Included: No
SRAM X0 2.2 Crankset
$519.99
Precision, stiffness and power are yours with SRAM's X0 Crankset. It boasts carbon arms with a forged aluminum spine for mountain-topping stiffness and seriously low weight. Gear changes are just as impressive as the stiffness-to-weight ratio thanks to SRAM's super-stiff X-Glide chainrings that deliver lightning-quick shifting that you'll have to experience to believe. From monster climbing XC races to hard-hitting enduro stages and all the rides in between, SRAM's X0 cranks are your ticket to off-road heaven. - Bottom Bracket sold separately
SRAM S300 1.1 Crankset
$199.99 - $202.00
SRAM's S300 1.1 single-speed Crankset combines their stiff 7075-aluminum chainring with their lightweight 6061-aluminum forged arms. The high-profile teeth are compatible with 9- and 10-speed chains, and the stout spindle efficiently transfers your power. Plus, GXP bottom bracket cups are included.
Shimano Deore XT Crank (Triple)
$314.99
- Various choices for bike and riding style - More durable chainwheel teeth - New 3D composite chain ring's teeth composition is optimized for each chainwheel load out (1x11, 2x11 & 3x11) with steel driving gear teeth and aluminum support gears - Improved driving rigidity - Loose ratio gear combination for minimum shifting gap and maintaining rhythm - Enhanced chain retention - Better sealing and better rotation - Model Number : FC-M8000-3 - Series : DEORE XT - Crank Construction : HOLLOWTECH II Technology - Cassette Compatibility : 11 - Bolt Circle Diameter : P.C.D. 96/64mm - Chain Line : 50mm - BB Shell Width : 68, 73mm
FSA BB-386EVO/Press-Fit BB30 Bearing Assembly
$69.99 - $412.00
- 42x30x7mm BB30 cartridge bearings housed in a press-fit, composite sleeve assembly for use with a BB386EVO or BB30 crankset in a BB386EVO or Press-Fit 30 (PF30) frame - Road sets include bearings, shields and a wavy washer - Mountain sets include bearings, shields and a spacer - Choose ceramic or stainless steel options
Campagnolo Record Ultra-Torque Crankset
$775.00 - $900.00
Campagnolo's incredible Record Ultra-Torque Crankset sports a unique, integrated spindle that joins the two sides of the crankset together via a toothed Hirth joint in the center. Campy's ultra-smooth bottom-bracket bearings are included and fit into outboard cups (sold separately). The aesthetically striking design provides incredible stiffness, while Campagnolo's standardized BCD (145/112mm) allows for multiple chainring sizes. Plus, the Record chainrings sport special pins and plating for fast, silent shifts and long life. - Chainrings included: Yes - Drivetrain speeds: 11 - Number of chainrings: double - Spindle interface: Campagnolo Ultra-Torque
Shimano Deore XT Hollowtech II Boost Crankset
$274.99
Ride anywhere 11-speed rider tuned gearing. The power to choose how and where you ride. Consistent shifting performance and enhanced chain management. Optimal balance of durability and lightweight. High efficient and precise shifting. These cranks are Boost compatible. - Enhanced chain retention. - Better sealing and better rotation. - Model Number : FC-M8000-2 - Series : DEORE XT - Cassette Compatibility : 11 - 4-Arm Chainrings : x - Chainring Sizes : 38-28T, 36-26T, 34-24T - Bolt Circle Diameter : P.C.D. 96/64mm - Crank Arm Length : 170mm/175mm - Chain Line : 51.8mm - BB Shell Width : 68, 73mm
Campagnolo Super Record 12x2 Speed Crankset
$1,323.00
The new Super Record 12x2 Speed crankset: an intense concentration of innovation that results in the greatest possible stiffness and precision in derailing, whilst providing a dedicated aerodynamic “super design." The new carbon fiber Super Record 12x2 Speed crankset has been made lighter on the inside through Campagnolo Hollow Technology, which uses the Ultra-Torque bracket system with a titanium axle to transfer all of the force the athlete applies to the pedal to the drivetrain. The new Super Record 12x2 Speed crankset can be installed on any type of frame, whether or not it is being used with disc brakes because it optimizes the chain line on the frame with a rear hub flange measuring 130, 135 or 142 millimeters, without affecting the Q factor, which remains constant at 145.5 millimeters thanks to the new hand crank design. The use of ceramic Cult bearings leads to obtaining the smooth ride that the Campagnolo brand is known for. The innovative design of the outer chainring ensures faster, quieter derailing owing to the contoured pin. The symmetrical design of the inner chainring teeth allows improved stability with chain crossovers. The double wheel sizing standards (112 and 145 millimeters) combined with the eight fixing screws, optimize weight and stiffness through the increased use of carbon fiber. The varying number of pins for each of the three chainring combinations (34/50, 36/52, 39/53) facilitates upshifting due to the optimized free strokes associated with each combination. The special drains on the inside of the outer chainrings optimize performance when downshifting in dead spots.
SRAM RED 1 AXS Quarq Road Power Meter DUB
$1,540.00
In certain disciplines, the single-ring drivetrain reigns supreme. Championing simplicity, strength and durability, the SRAM RED 1 AXS power meter meets the demands of triathletes, time trialists and cyclocross racers. The power meter features improved aerodynamics thanks to direct mount aero chainrings with fully integrated power, and the tighter gearing range is perfect for racing and flatter terrains. - Single-ring drivetrain simplifies functionality - 48T and 50T variants have fully integrated power into a direct mount aero chainring - 36-46T variants have spider-based power - Chainrings can be easily changed without requiring recalibration of the power meter - Power readings are accurate within +/-1.5% and aren't affected by climate conditions during a ride - Power balance measures left and right legs separately - SRAM X-SYNC wide-tooth, narrow-tooth chainring technology provides maximum chain control - Laser-etched chainring finish is more durable - DUB bottom bracket adds durability and simplicity - Non-aero chainrings can be installed with a single tool, making gearing changes a breeze - Bottom bracket not included - BB Compatibility: All SRAM Road DUB BBs - BB Spindle Interface: DUB - Chainring material: Aluminum - Crank arm material: Carbon - Power Meter Type: ANT+ and BLE
Shimano XTR Hollowtech II M9100-1 Crank Arms
$569.99
Shimano XTR M9100 cranks feature a lightweight and rigid design thanks to Hollowtech II crank construction. Chainrings can be easily exchanged with the direct mount system and one key release. - Single front chainring set up (chainring not included) - Gear tooth profile designed for MTB riding usage - Crank can be exchanged between single and double front chainring set ups - 162mm Q-Factor
Shimano XTR Hollowtech II M9100-2 Crankset
$809.99
Shimano XTR M9100 cranks feature a lightweight and rigid design thanks to Hollowtech II crank construction. Chainrings can be easily exchanged with the direct mount system and one key release. - Double front chainring set up - Combines wide range and close gear steps - Gear tooth profile designed for MTB riding usage - Crank can be exchanged between single and double front chainring set ups
Shimano GRX RX600-10 10-Speed Crankset
$174.99
Shimano's new FC-RX600-10 crankset balances weight and efficiency for mixed-terrain riding. Gearing options cater to the specific demands of gravel riding and to provide tighter gear steps for maintaining pedaling cadence. The 2x10-speed crank is available in a 46-30T chainring combination and 170, 172.5, and 175mm crank arm lengths. - Wider gear range for long tours or unknown terrain - Optimum gearing for mixed terrains and riding styles - Gear combination: 46-30T
SRAM X0 3.3 Crankset
$519.99
Precision, stiffness and power are yours with SRAM's X0 Crankset. It boasts carbon arms with a forged aluminum spine for mountain-topping stiffness and seriously low weight. Gear changes are just as impressive as the stiffness-to-weight ratio thanks to SRAM's super-stiff X-glide chainrings that deliver lightning-quick shifting that you'll have to experience to believe. With the weight of a feather and the stiffness of an I-beam, SRAM's X0 cranks are your ticket to off-road heaven. - Bottom bracket sold separately
SRAM RED 22 Crankset
$615.99
Sprint-worthy stiffness meets climb-friendly weight in SRAM's RED 22 Crankset. Its hollow carbon construction minimizes weight and maximizes stiffness while the chainrings attach with a hidden 5th bolt that uses the crank arm as the mounting point to further increase the stiffness and shed weight. The X Glide R chainrings start out as 5mm-thick aluminum plates and are precision machined to eliminate all unessential material while retaining extreme stiffness. Then, they are carefully ramped and pinned to provide lightning fast shifts. With so much great technology and 11-speed compatibility, your competition with be RED with envy.
WeThePeople Legacy Crank
$269.99
The Legacy crank uses a super tough 2-1/2 piece construction, a larger 22mm spindle and square shaped chromoly arms to maximize strength. WeThePeople toughened up areas like the pedal boss with its own investment cast gusset, to beef things up. - Designed for use with a 22mm Mid Bottom Bracket (not included) - Full seamless Japanese 4130 chromoly tubing, liquid post heat-treated - Grind-friendly, square-shape arms - RSD/LSD compatible
SRAM XX Crankset
$669.99 - $714.99
When SRAM began developing XX, they were looking to create the lightest, most precise and technically advanced components possible, and boy have they delivered! The XX Crankset boasts carbon/aluminum arms to keep the weight incredibly low and boost stiffness to stratospheric levels. The chainrings are no small feat of engineering, either. They’re painstakingly cut from solid aluminum blocks to eliminate power-robbing flex and they’re exquisitely ramped and pinned to provide lightning-quick, impressively crisp gear changes. What’s more, the XX is available in two widths so you can get the perfect fit and maximize efficiency.
Linus Painted Chainguard
$45.00
The Linus Chainguard is designed to fit on their Roadster, Gaston, and Mixte bicycles. It's made of light and durable aluminum, clamps to the seat tube and seatstay with the included installation hardware, and has a beautiful painted finish.
SRAM Force 1 Crankset
$357.00 - $405.00
Forget front derailleurs; SRAM's Force 1 Crankset brings a game-changing upgrade in performance and reliability to cyclocross, road, and other 700c disciplines. Force 1 combines the durability, simplicity and efficiency that SRAM is known for with their 1x mountain technology. - Single-ring drivetrain simplifies functionality - SRAM X-Sync: wide-tooth, narrow-tooth chainring technology provides maximum chain control - Chainrings available in 42, 50 (110 BCD), and 52 (130BCD) teeth to conquer every course from sand dunes to gravel-road assaults - Unidirectional carbon crank arm matched to a forged aluminum spider for lightweight and durability - Weight 679g-24mm, 172.5mm, 50T, no BB - Bottom bracket not included
SRAM X01 X-Sync Crankset
$494.99
Built for total chain control, SRAM's X01 X-Sync Crankset is built with carbon arms and forged aluminum spider for maximal stiffness and durability while keeping the weight down. Each tooth’s thickness is CNC-machined to fit better into the chain’s inner and outer links. SRAM's X-Sync Direct Mount chain rings let you tune your gear range to match your terrain, wheel size and riding style. • 32-tooth • Weight: 645g (GXP, 175mm, 32T)
Shimano Deore XT Crank (Double)
$274.99
- Various choices for bike and riding style - More durable chainwheel teeth - New 3D composite chain ring's teeth composition is optimized for each chainwheel load out (1x11, 2x11 & 3x11) with steel driving gear teeth and aluminum support gears - Improved driving rigidity - Loose ratio gear combination for minimum shifting gap and maintaining rhythm - Enhanced chain retention - Better sealing and better rotation - Model Number : FC-M8000-2 - Series : DEORE XT - Cassette Compatibility : 11 - Bolt Circle Diameter : P.C.D. 96/64mm - Crank Arms : HOLLOWTECH II Technology - Bottom Bracket : BB-MT800 / BB-MT800-PA - Chain Line : 48.8mm - BB Shell Width : 68, 73mm
Campagnolo Chorus Crankset
$670.00
Campagnolo is all about drivetrain evolution, and their Chorus Crankset proves it. The full-carbon cranks and 4-arm spider feature a unified bolt pattern that allows for all three chainring standards. This design incorporates an 8-bolt pattern with a spider arm that not only holds the chainring in place by way of the bolt, but also supports the chainring to increase system rigidity. The crank arms and spider are hollow for maximum stiffness and minimal weight. The integrated Ultra-Torque spindle joins the crankset together via a toothed Hirth joint in the center. - Chainring BCD: Campagnolo 146 Asymmetric, Campagnolo 112 Asymmetric
Shimano Dura-Ace 9000 Left Crank Arm
$344.99
Shimano Dura-Ace Left Crank Arm. - Spindle Interface Type: Hollowtech II
Shimano XTR M900 Left Crank Arm
$309.99
Shimano XTR Left Crank Arms - Spindle Interface Type: Hollowtech II
SRAM RED DUB Crankset
$884.99 - $922.00
The SRAM RED crankset leverages a pivotal design innovation: smaller chainrings and a wider cassette range. This leads to smoother and faster shifting up front and more useful gearing for today’s riders. The new configurations improve cadence and efficiency while also delivering shifts that are crisp, clean, and quick—every time. - X-Range gearing technology gives you more range and a smoother gear progression, so you’re always in the right gear - Improved front shifting performance for crisp and accurate front shifts - Unique chainring design results in a lighter weight, stiffer, more durable crankset - DUB bottom bracket adds durability, simplicity, and broad compatibility - Can be upgraded to a power meter - Version: D1
SRAM GX-1000 2x10 Crankset
$169.99
SRAM's GX 2x10 Crankset delivers consistent performance every time out. Featuring SRAM’s X-Glide chainrings, the GX crankset is engineered for 2x10 shifting performance. Flawless shifting means you’ll never again compromise your speed and power in unpredictable off-road terrain. No more missed shifts. X-Glide puts you in the right gear, right now. - 10-Speed - 6000 series AL - X-GLIDE 2x10 shifting technology - Fat Bike GXP: 100mm spindle
SRAM GX-1000 2x11 Crankset w/All Mountain Chainguard
$175.00
SRAM's GX 2x11 Crankset W/All Mountain Chainguard delivers consistent performance every time out. Featuring SRAM’s X-GLIDE chainrings, the GX crankset is engineered for 2x11-speed shifting performance. Flawless shifting means you’ll never again compromise your speed and power in unpredictable off-road terrain. No more missed shifts. X-GLIDE puts you in the right gear, right now. • 11-Speed • 6000 series AL • Bottom Bracket compatibility: GXP or BB30 (not included) • X-GLIDE 2x10 shifting technology • Chainrings: 36/24-tooth • Crank lengths: 175mm, 170mm • Color: Black • All Mountain Guard included, but not shown
SRAM X01 Carbon Eagle DUB Crankset
$648.00
The X01 Eagle DUB crankset is designed to be tough; ready for aggressive Trail and Enduro riding. The Carbon-tuned crankset paired with DUB technology simplifies the relationship of the spindle to the bottom bracket. DUB-powered cranksets mean simplicity, compatibility and durability. - SRAM DUB technology creates a lighter, stiffer and stronger crankset - Carbon-tuned lay-up crank design provides extreme stiffness and light weight - Included direct mount X-SYNC 2 chainring provides significantly quieter performance, with better mud clearing and durability - Chainring is designed specifically for Eagle chains and drivetrains - DUB compatible bottom bracket sold separately - BB Included: No - Chainring BCD: Sram Direct Mount - Crank Intended Use: Mountain - Number of Chainrings: Single - Drivetrain Speeds: 12, 11, 10 - Spindle Interface Type: SRAM DUB - Chainline/Hub Compatibility: 135/142 MTB Hubs
Page 1 of 5 Next page