Hubs

Whether your joy comes from barreling downhill, or tearing up to the top, SRAM's MTH 746 rear hub will leave a smile on your face. An aluminum hubshell with machined flanges grant the hub a low weight without compromising durability. Plus, tough cartridge bearings roll smooth for the long haul.

Whether the goal is a finish line, epic adventure or simply getting back home again, SRAM's 900 hubs are ready for the challenge. On the inside, their smooth and durable DOUBLE TIME drive mechanism ensures rapid engagement for quick and confident pedal responsiveness. SPEEDBALL bearings provide smooth, long-lasting rotation performance. Multiple spoke-count and cassette-capability options, as well as interchangeable end caps, make the 900 hubs a perfect choice for any disc-equipped road, gravel, cyclocross, cross country, trail, or enduro bike. - Fully convertible with tool-free end caps - 24, 28 or 32 spoke holes

Quick Release Model • Model Number: HB-M8000 • Series: DEORE XT • Disc Rotor Mount: Center Lock Disc • Axle Type: QR • Axle Length: 100mm • Axle Diameter: 14mm • Contact Sealing: Labyrinth & Contact • Spoke Holes: 32H • Center to Flange (Right): 41mm • Center to Flange (Left): 44mm 15x100mm Thru-Axle Model • Model Number: HB-M8010 • Series: DEORE XT • Disc Rotor Mount: Center Lock Disc • Axle Type: 15mm E-Thru • Axle Length: 100mm • Axle Diameter: 17.5mm • Contact Sealing: Labyrinth & Contact • Spoke Holes: 32H • Center to Flange (Right): 44mm • Center to Flange (Left): 44mm

• Super polished Bearing Races • Spoke Holes: 36/32/28H • Model Number: HB-7710-R • Series: DURA-ACE • Over Locknut: 120mm • Axle Type: 164mm • Stainless Steel Ball Bearings: stainless steel • Contact Sealing: Dust Cap • Spoke Holes: 28/32/36 • Spoke Hole Circle: 44mm • Hub Shell: aluminum • Center to Flange (Right): 32.25mm (singe) / 33.5mm (double) • Center to Flange (Left): 34.75mm (single) / 33.5mm (double) • Average Weight w/o QR: 298g (w/o lockring)

The DT Swiss 240s MTB Center Lock Rear Hub hits the sweet spot between low weight and reliability. With multiple axle options and 6-bolt rotor adapters for the Center Lock spline, you can build up a high-end wheel for nearly any bike. On the winning end of countless World Cups and local races in every discipline from XC to enduro to downhill, these hubs are the centerpiece for thousands of nearly frictionless rides. Plus, DT's legendary Ratchet System ensures precise engagement and exceptional reliability, no matter how hard you stomp on the pedals.

The DT Swiss 240s 6-Bolt Rear Hub hits the sweet spot between low weight and reliability. With multiple axle options, you can build up a high-end wheel for nearly any bike. DT's legendary Ratchet System ensures precise engagement and exceptional reliability, no matter how hard you stomp on the pedals. On the winning end of countless World Cups and local races in every discipline from XC to enduro to downhill, these hubs are the centerpiece for thousands of nearly frictionless rides.

Shimano's Track Dura-Ace Hi-Flange Hubs build up into stiff, fast spinning wheels that want to sprint right out off the line. Stainless steel bearings and Borozon treated bearing races minimize drag for maximum efficiency and speed. You get your choice of single or double-sided cog threading.

Shimano Alfine Centerlock Dynamo Front Hub - Compatible with 26 to 28" wheel sizes - Light alloy QR lever and nut - 6V, 3.0W output - Centerlock rotor mount - Center to Flange: 28.5 R , 20 L - Color: Black - Defined Color: Black - Flange Diameter: 70 R , 70 L - Front Axle: QR x 100mm - Hub Drilling: 32, 36 - Hub/Brake Compatibility: Center-Lock Disc - Spoke Interface: J-Bend - Weight: 575 g

Shimano XT FH-M756 Series Rear Hub - Double contact bearing seals - Super polished bearing races for low friction rolling - Light alloy QR lever and nut - 6-Bolt rotor mount - Bearing Type: Loose Ball - Cassette Body Type: Shimano/SRAM 8, 9, 10 Speed - Center to Flange, Left: 33.5 - Center to Flange, Right: 20.5 - Flange Diameter Left: 61 - Flange Diameter Right: 61 - Hub Drilling: 32 - Hub/Brake Compatibility: 6-Bolt Disc - Rear Axle: QR x 135mm - Skewer Included: Yes - Spoke Interface: J-Bend - Weight: 495 grams

The partner in crime to WeThePeople's Supreme Rear Cassette Hub, the matching Supreme Front Hub uses high-quality Japanese sealed bearings and a beefy, heat-treated 4130 chromoly axle held on with 10mm female bolts. Match it up with WTP nylon fiberglass Supreme front hub guards and you have a dialed front-end setup. - 14mm hollow/hardened heat treated chromoly axle - 10mm female bolts

Ready for everything from XC racing to enduro charging, the DT Swiss 240s Straightpull Center Lock hub hits the sweet spot between low weight and reliability. The straight pull spoke design makes for a stiff, responsive mountain bike wheel that will roll for thousands of nearly frictionless miles. Plus, DT's legendary Ratchet System ensures precise engagement and exceptional reliability, no matter how hard you stomp on the pedals.

The DT Swiss 240s MTB 6-Bolt Front Hub hits the sweet spot between low weight and reliability. With multiple axle options, you can build up a high-end wheel for nearly any bike. On the winning end of countless World Cups and local races in every discipline from XC to enduro to downhill, these hubs are the centerpiece for thousands of nearly frictionless rides.

DT Swiss' 350 MTB hub delivers the amazing performance you've come to expect from DT Swiss at an incredible value. Fast and reliable, DT's legendary Ratchet System ensures precise engagement no matter how hard you stomp on the pedals. Plus, these Center Lock disc hubs make rotor installation and removal super fast.

The 350 road hub delivers the amazing performance you've come to expect from DT Swiss at an incredible value. Fast and reliable, these hubs will roll for thousands of nearly frictionless miles.

Whether your joy comes from barreling downhill, or tearing up to the top, SRAM's MTH 716 front hub will leave a smile on your face. An aluminum hubshell with machined flanges grant the hub a low weight without compromising durability. TPlus, tough cartridge bearings roll smooth for the long haul.

Shimano's Deore Front Hub offers durability and fast, smooth riding. It features a high-quality cold-forged aluminum shell, super durable angular contact bearings with high-polish bearing surfaces, and Shimano's easy-to-use Center Lock disc mount. The included quick-release skewer makes wheel installation and removal a breeze. - Hub/Brake Compatibility: Center-Lock Disc - Axle Type: QR - Axle Length: 100mm

Whether the goal is a finish line, epic adventure or simply getting back home again, SRAM'S 900 hubs are ready for the challenge. On the inside, the smooth and durable DOUBLE TIME drive mechanism ensures rapid engagement for quick and confident pedal responsiveness. SPEEDBALL bearings provide smooth, long-lasting rotation performance. Multiple spoke-count and cassette-capability options, as well as interchangeable end caps, make the 900 hubs a perfect choice for any disc-equipped road, gravel, cyclocross, cross country, trail, or enduro bike. - Versatile driver body can accept ROAD or MTB drivetrain, full spline or XD cassettes - Fully convertible with tool-free end caps - BOOST variants - 24, 28 or 32 spoke holes

Finally, a hub worthy of the X0 name. Built to roll over the toughest mountain terrain, the SRAM X0 Hub proves that being solid doesn't mean being sluggish. Super-precise SPEEDBALL bearings mean lower resistance, faster revolutions and no more time spent readjusting play. SRAM went the extra mile on the X0 Hub—so you have less to worry about on the trail. Go with what works. X0 Hubs can be customized perfectly to your ride. - Super-precise SPEEDBALL bearings mean lower resistance, faster revolutions and no more time spent readjusting play - Versatile hub—light enough for XC, strong enough for All-Mountain - SPEEDBALL precision cartridge bearings for light, smooth action - 3D forged hub shell with SEEKER angled flanges for durability and fewer broken spokes

Finally, a hub worthy of the X0 name. Built to roll over the toughest mountain terrain, the SRAM X0 Hub proves that being solid doesn't mean being sluggish. DOUBLE TIME ratchet design gives you smooth 6.9-degree engagement—all while keeping everything light and steady. Super-precise SPEEDBALL bearings mean lower resistance, faster revolutions and no more time spent readjusting play. From pawl tooth to side cap, SRAM went the extra mile on the X0 Hub—so you have less to worry about on the trail. Go with what works. X0 Hubs can be customized perfectly to your ride. - DOUBLE TIME ratchet design gives you smooth 6.9-degree engagement - Super-precise SPEEDBALL bearings mean lower resistance, faster revolutions and no more time spent readjusting play - Versatile hub—light enough for XC, strong enough for All-Mountain - DOUBLE TIME ratchet mechanism for durable, quick engagement - SPEEDBALL precision cartridge bearings for light, smooth action. No play adjustment needed for simplicity and convenience - 3D forged hub shell with SEEKER angled flanges for durability and fewer broken spokes - 150mm version includes 12x150mm & 12x157mm endcaps

Shimano's ZEE Rear Freehub is a quick engaging, smooth-running hub that doesn't drain the bank account. It features quality sealing, adjustable angular-contact bearings, and rotates on an extra-stiff one-piece rear axle with integrated cone construction. It's Center Lock compatible and is available in 135, 142 and 150mm configurations.

From World Cup DH runs to big hits on your local trails, Shimano's Saint rear hub is the answer. Its overbuilt features, like a 12mm thru-axle, beefy flanges, and impact-resistant angular contact bearings, give you the confidence you need to go big and stick the landing. The freehub uses micro-ratchet construction for fast engagement so you can sprint out of the corners and pick up speed for that next double. It's compatible with 8-,9-, and 10-speed drivetrains and uses Shimano's Centerlock Rotor Mount to keep rotor swaps easy.

The DT Swiss 240s MTB Center Lock Front Hub hits the sweet spot between low weight and reliability. With multiple axle options and 6-bolt rotor adapters for the Center Lock spline, you can build up a high-end wheel for nearly any bike. On the winning end of countless World Cups and local races in every discipline from XC to enduro to downhill, these hubs are the centerpiece for thousands of nearly frictionless rides.

Shimano's Dura-Ace Track Hi-Flange Hubs build up into stiff, fast spinning wheels that want to sprint right out off the line. Stainless steel bearings and Borozon treated bearing races minimize drag for maximum efficiency and speed.

• Model Number: HB-7710-F • Series: DURA-ACE • Over Locknut: 100mm • Axle Type: 142mm • Stainless Steel Ball Bearings: stainless steel • Contact Sealing: Dust Cap • Spoke Holes: 28/32/36 • Spoke Hole Circle: 38mm • Hub Shell: aluminum • Center to Flange (Right): 37mm • Center to Flange (Left): 37mm • Average Weight w/o QR: 203g

DT's 350 MTB rear hub offers top-end performance for all your riding needs. DT Swiss' Ratchet freewheel system provides precise engagement, high load capacity, and reliability. The Ratchet System driver is extremely durable and can be easily serviced—without tools—in minutes thanks to it's press fit assembly. The press fit assembly also allows the hub to work with a wide array of axle configurations; by simply swapping out the tool-free end caps (sold separately), you'll be able to enjoy the legendary DT Swiss quality on almost any bike. • Accepts 6-bolt rotors

An evolution of their world-renowned Supreme hubs, the WeThePeople Arrow hubs are a super lightweight alternative for the pegless riders out there looking for unrivaled performance and quality. The 7075-T6 alloy axle and knurled CNC machined cones help keep this hub incredibly light, and give it a super smooth look unlike any other front hub on the market.

Quick-Release Model • Model Number: FH-M8000 • Series: DEORE XT • Disc Rotor Mount: Center Lock Disc • Axle Type: QR • Over Locknut: 135mm • Axle Length: 146mm • Axle Diameter: 15mm • QR Skewer Length: QR skewer length : 168, 173mm • Contact Sealing: Labyrinth & Contact • Spoke Holes: 32H • Center to Flange (Right): 45mm • Center to Flange (Left): 44mm 12x142mm Thru-Axle Model • Model Number: FH-M8010 • Series: DEORE XT • Disc Rotor Mount: Center Lock Disc • Axle Type: 12mm E-Thru • Over Locknut: 142mm • Axle Length: 142mm • Axle Diameter: 14mm • Contact Sealing: Labyrinth & Contact • Spoke Holes: 32H • Center to Flange (Right): 45mm • Center to Flange (Left): 44mm • Center to Flange (Left): 44mm

DT Swiss' 350 MTB hub delivers the amazing performance you've come to expect from DT Swiss at an incredible value. Fast and reliable, these Center Lock disc hubs make rotor installation and removal super fast.

Shimano XT M756 front hub. - Double contact sealing - Super polished bearing races for low friction rolling - Light alloy QR lever and nut - 6-bolt ISO disc mounting surface

The updated team favorite, FX2 freecoaster hub. Featuring proven KHE based internals, a 9T dual-sealed bearing driver with additional bushing, and a super-strong heat-treated Chromoly 14mm axle with 6mm internal hex for easier maintenance. Updated with the DTC system, changing drive side only requires a driver change instead of a whole hub replacement. Slack can be adjusted from 55 degrees up to 180 degrees depending on your preference, and ships with 156 degrees slack as standard. The included nylon CR and DR hub guards keep your hub protected from grinds straight out of the box. - Axle: 14mm Hollow Heat-Treated Chromoly - Axle Nuts: 17mm Chromoly - Shell: 6061-T6 Aluminum 36-hole - Bearings: 1 x 6002, 1 x 7905, 2 x 6902 + Bushing - Clutch: DTC (Dual Threaded Clutch) - Cones: Threaded Drive Side and Non-Drive Side - Guards: Compatible with Cinema DR and CR hub guards - Slack: Includes 3 Slack Washer For Fine Tuning - Weight: 25.3oz (w/ Guards Installed)