Tools

Cleans bicycle chain quickly, easily, and effectively — without the hassle and mess of removing the chain from the bike. The Cyclone uses a large solvent reservoir, hundreds of rotating bristles, and a two-step cleaning process to get chains really clean, improve shifting performance, and extend the life of the chain and other expensive drivetrain parts. - Works with all multi-speed bikes (5, 6, 7, 8, 9, 10, 11, and 12-speed) as well as some single-speed models and e-bikes - Strong magnet at the bottom of the fluid reservoir holds metallic particles scrubbed from the chain - Special wicking sponge draws solvent from the chain as it exits, minimizing drips and mess - Sturdy handle makes the Cyclone easy to use and control - Holds 2 fluid ounces (59ml) of solvent

Park's Compact Crank Puller is used to remove Shimano Octalink, ISIS Drive and square-taper cranksets. It includes 2 rotating tips (16.3 and 11.3mm) to make the job easy. This is a great tool for your travel and home tool kit.

To prevent poor shifting and uneven drivetrain wear, most manufacturers recommend chain replacement at or before 1% stretch. Now you can quickly and accurately determine the wear and stretch of any chain with Park's Chain Checker. Simply insert the Chain Checker’s pins into 2 links, press the swingarm gauge tight, and then check the gauge window for an accurate reading!

A professional quality shop chain tool that works on 5-speed to 12-speed Road and Mountain Bike derailleur chains*, including SRAM AXS 12 speed, as well as 1/8-inch and 3/16-inch chains. The CT-3.3 features an adjustable locating shelf so it works on any width chain to remove and install chain rivets. Built to last and easy to use, the CT-3.3 features a comfortable handle, investment cast steel body and replaceable driving pin (#CTP). *The CT-3.3 will install, but not peen, Campagnolo 11 and 12-speed chain rivets. - Comfortable T-handle - Replaceable driving pin (CTP) - Investment cast steel body - Adjustable locating shelf

The Masterlink Pliers is a multi-tool developed to provide functions that are not on a typical multi-tool. It is designed to be light and compact so you can carry it with you. This tool serves as a tire lever, valve core remover, valve stem lock nut wrench, and master link pliers. It also provides storage for two master links so you will always be prepared on the trail. Magnets hold the master links securely in place and self close the tool. - Weight: 38.5g - Size: 116 mm x 20 mm x 9 mm - Material: 7075-T6 aluminum - 9, 10, 11, and 12-speed master links and chains - Compatible with SRAM PowerLock Link, Shimano Quick-Link, KMC Missing Link and other similar master links

Park's BBT-18 is a heavy duty, investment cast tool for installing and removing all Shimano, ISIS Drive, and ISIS Overdrive 8-notch bottom bracket cups.

The tire lever, though seemingly one of the simplest and most basic of cycling tools, is one commonly used by almost every cyclist, and unfortunately, one often responsible for unnecessary frustration. Really, what is more fun than flatting far away from home, being thrilled you lugged that spare tube and pump, and then having your tire levers snap in two? Pedro's award-winning, universally loved tire levers feature molded box construction and a proprietary plastic composite blend that makes them the strongest levers available. The unique chisel tip shape easily inserts beneath the tire bead and the slightly thicker shape keeps the lever securely in place. Additionally, the bold shape of the lever and helpful dual spoke hooks makes removal of even the tightest tires a simple task. - Award-winning and universally loved - Molded box construction and proprietary plastic blend makes these the strongest levers available - Chisel tip shape is easy to insert beneath the bead and the slightly thicker shape keeps the tire lever from slipping - Bold shape makes it easy to remove the tightest of tires without bending or breaking

A favorite of shop mechanics for over 30 year's, Park's CCP-22 Crank Puller removes crankarms that feature square tapers, and those that fit on Power Drive and Power Spline bottom bracket interfaces. The long, comfortable, built-in handle and fine thread provide the leverage needed to remove even the tightest crankarms. And, there's a rotating tip to ensure smooth operation and long life.

• Updated to be stronger, smoother, and more versatile • Features a new material and redesigned tip for easier entry into just about any tire, including tubeless • The unique design lifts the tire away from the rim and features a spoke hook to use when multiple levers are needed • This set includes 3 tire levers

The ultimate trailside companion. These high tensile steel multi-tools feature a precise fit and finish and side grips for a secure handhold even with gloves on. The m19 includes: - Chain tool: 8/9/10 speed compatible - Spoke wrench: #0, 1, 2, 3 - Hex wrenches: #2, 2.5, 3, 4, 5, 6, 8 - Open wrench: 8mm, 10mm - Screwdrivers: Phillips #1, Phillips #2, flat #2 - Torx: t-10, t-25 - Stainless steel carrying case - Length: 89 mm - Weight: 175g - Warranty: lifetime

Zipp Speed Weaponry Valve Extender Wrench Set - Two 4 mm and 5 mm combination wrenches - Replacement wrenches required to properly install Zipp integrated valve extenders - Use with Zipp Tangente tubes with aluminum Presta valve and aluminum valve extender

- The crank puller is designed to remove standard square spindle cranks. With help of the included adaptor other standards such as ISIS and Octalink cranks can also be removed.

Park’s Professional Cable And Housing Cutter is specifically for use on derailleur and brake cables and housing. It even makes quick work of hard-to-cut shift-cable housing. Its cold-forged, heat-treated-steel handles won't bend and its precision-ground jaws cut perfectly every time. Its dual-density molded grips are specially contoured for superior comfort and control. Plus, there’s a built-in cable-end crimper and a forming hole for reforming housing ends.

The ultimate trail-side companion. Details - 20 high tensile steel multi-tools, including an integrated tire plug tool - Tire plugs come included with a storage case that mounts directly to the tool - The case can be used to conveniently store chain links Specs - Chain Tool: 8/9/10/11/12 speed compatible - Hex Wrenches: #2, 2.5, 3, 4, 5, 6, 8 - Length: 89mm - Open Wrench: 8mm - Screw Drivers: Phillips #1 & #2, flat #1 - Specialty Tools: Tire plug tool, tire plugs, valve core removal tool, rotor straightener - Spoke Wrench: #0, 1, 2 - Torx: T-10, T-25 - Warranty: Lifetime - Weight: 203g

The new 8-Bit System is a group of multi-tools designed to work together to solve most trailside fixes. They are lightweight, strong, versatile, and small enough to fit in a jersey pocket or riding tool wrap. Three multi-tools begin the 8-Bit System: 8-Bit Chainbreaker + Utility Knife Multi-Tool, 8-Bit Tire Lever + Rim Dent Remover Multi-Tool, and 8-Bit Pack Pliers. A total of 22 functions between the three tools will keep you rolling to the next town or trailhead. - 17 functions: spoke wrench; valve core wrench; flat head #3.5 and Phillips #2 screwdriver bits; 2, 2.5, 3, 4, 5, 6, and 8mm hex; and T10, T25 Torx-compatible bits; install and remove master links; clear tire sealant clogs from valve stem; tighten valve stem lock nut - Magnets keep all bits in place - Ball detent swivel head helps access hard-to-reach places - Handle doubles as breaker bar for extra torque when head is bent - 8mm hex bit tested to over 40 Nm torque - Pliers works with 9-, 10-, 11- and 12-speed master links and chains (not compatible with Campagnolo 12-speed chains) - Master Link storage is compatible with SRAM PowerLock Link, Shimano Quick-Link, KMC Missing Link and other similar master links (not compatible with Connex Links by Wipperman)

Park's Gear Clean Brush has a handle on one end with a curved, serrated edge perfect for cleaning between cassette cogs. The other end's tough nylon bristles are ideal for cleaning the derailleurs, chain and other drivetrain parts to keep them clean and prevent premature wear. It also works great on brakes and other components that collect dirt and grime. The GearClean easily fits in a toolbox or pack.

- Hex wrenches 2, 2.5, 3, 4, 5, 6, 8 - TX wrenches 10, 25 - PH1 screwdriver - Chain tool - Schrader & Presta valve tool - Flat screwdriver 1.0 x 5.0 - Spoke Key 3.3, 3.45 and DT

Features durable 1000 denier, wrap-around zipper, extra-long 3M reflective strip for added safety at night and a zippered expanding main compartment for added storage. Mounts and removes quickly with our innovative QuickClick system. 13-function tool kit Includes 2, 3, 4, 5 & 6mm Allen wrenches, T25 Torx wrench, Phillips screw driver, 8 & 10 mm open wrenches, universal chain tool* with chain hook, 2 tire levers & a glueless patch kit. *The chain tool is compatible with single- and multi-speed chains up to 12-speed, NOT including Campagnolo hollow pin chains. - BAG ATTACHMENT: QuickClick (F25) w/seatpost strap - CAPACITY: 0.95 - 1.25 L / 58 - 76 ci - MATERIAL: 1000 denier nylon - EXPANDING: Yes - SEATPOST DIAMETER: Fits 25.4 – 34.9 mm - ADDED FEATURES: 3M reflective strip, Safety light clip, Rain cover, 13-function tool kit - SIZE: 16.5 x 12.3 x 10.5 cm / 6.5" x 4.8" x 4.1" - WEIGHT: 445g / 15.66 oz

A great way to hold small parts, tools and components during a repair, Park Tool's Benchtop Overhaul Mat features multiple small pockets and one large work area. It's perfect for suspension work or to organize parts for installation. • Made of a rubber-like PVC • Cleans easily and looks great on any bench • Measures: 14.7” x 7” (38cm x 18cm)

Park's I-Beam Mini Fold-Up Hex Wrench/Screwdriver/Torx Set with Chain Tool includes 1.5, 2, 2.5, 3, 4, 5, and 6mm Allen wrenches, a socket 8mm Allen, a regular screwdriver, a T25 Torx tool (for disc-rotor bolts), a tire lever, spoke wrenches and a chain tool. The I-Beam conveniently fits in pockets and packs, too.

Quickly fix whatever on-ride mishaps come your way with this astonishingly versatile pocket workshop. Packed with 16 individual precision CNC machined parts and a lightweight aluminium body, it's function rich, yet still jersey-pocket friendly - the perfect pocket companion for the open road or trail. - CNC'd steel tools - Ergonomic sides - 360-degree bit movement - Lock-tight sealed bits - Lightweight aluminium body - Width: 46mm - Length: 71mm - Weight: 110g Sixteen functions: - Hex key (mm): 2 | 2.5 | 3 | 4 | 5 | 6 | 8 - Spoke gauge: 13 | 14 | 15 | 16 - Phillips head: 2 - Torque: 25 - Mavic spline - Bottle opener - Chain splitter

The DT Swiss truing stand is the stand used by professionals. It is made of precision machined, polished, and anodized aluminum with hardened steel guides and mounts. - High-end quality and easy handling - Quicker wheel building - Compatible with all current bicycle wheels (12" – 29") with quick-release or thru-axle - Three precision multilink arms providing a wide range of contact points - Play-free precision gauges to measure lateral and vertical dish - Extremely stiff and solid clamping

Spoke Ruler

The most lightweight, compact 16 function multi-tool (with integrated chaintool) available. Very handy as it fits in a jersey pocket, saddle bag, or even a Ninja ToolBox. Tools: - 2 / 2.5 / 3 / 2.5 & 4 (L-type) / 5 / 8mm Allen wrenches - 4 / 6mm hex sockets - T10 / T15 / T25 Torx wrenches - #2 Phillips / flat head screw drivers - 14G / 15G spoke wrenches - CrMo steel chain tool and chain hook (the chain tool is compatible with single and multi-speed chains up to 12 speed, NOT including Campagnolo hollow pin chains) - Tool Material: Chrome vanadium steel - Body Material: Carbon fiber reinforced injection polymer - Added Feature: Leverage added on 4 / 6mm Allen wrench, L-type wrench - Size: 6.1 x 3.3 x 1.9cm / 2.4” x 1.3” x 0.5” - Weight: 92g / 3.24oz

- BB wrench for use with Shimano Hollowtech II, Truvativ GXP, and FSA

An ingenious lightweight multi-function tool! Two levers connect to form power link pliers for removing or installing a chain's master link. Power Lever easily separates into two pieces for use as two tire levers. Integrated chain hook holds chain steady while removing or installing master link. - 4 Tools: PowerLink pliers, tire levers and stainless steel wire chain hook - Tool Material: Engineering grade polymer - Chain link storage compartment - Size: 11.5 x 2.3 x 1.8cm / 4.5" x 0.9" x 0.7" - Weight: 45g / 1.59oz *Not compatible with Shimano QUICK-LINK (SM-CN900-11)

- Single 29mm open bore drift for use with 1/2" rods

The V Pro bike multi tool series includes a refined collection of tools developed for today's modern bicycles. Each model is designed and manufactured in-house and engineered to efficiently repair most road or trailside mechanicals. The machined steel tool bits are now longer and introduce our Black Anti-Corrosion technology, which provides superior corrosion resistance. The machined aluminum side plates are anodized black and deliver a compact, comfortable feel during use. With unmistakable Lezyne styling, the lightweight V Pro tools offer amazing value and functionality for all types of cyclists. - CNC 7075 alloy side plates - Anti-corrosion black chrome vanadium fastening hardware - Enhanced anti-corrosion black chrome vanadium bits - Hex 2/2.5/3/4/5/6/8mm - T10/T25/T30 - Phillips - Lightweight chain breaker tool - Spare master link storage - 114g

These shop-quality L-shaped hex wrenches have a genuine Bondhus balldriver tip on the long arm (excluding the 10mm) for hard-to-reach bolt heads and a straight tip on the short arm for high-torque applications. The HXS-1.2 includes a handy portable tool organizer/holder and it's hinged for easy access. • Includes 1.5, 2, 2.5, 3, 4, 5, 6, 8, and 10 mm sizes • Wrench tips are precision chamfered for a clean, tight fit • Made from industrial-quality Bondhus Protanium high torque steel

- For use with majority of Hex bolts found on a bicycle - 4, 5, 6mm Hex