Sugoi's Resistor Booties provide wind and water protection for those wet, cool rides. Made from stretch Lycra with a water resistant coating, they are light and snug enough to give you an aerodynamic edge. They also feature an offset rear zipper for easy on/off and reflective accents for enhanced visibility. • PU coated stretch Lycra offers lightweight wind and waterproof protection • Offset rear zip to eliminate Achilles tendon pressure point
Having a go-to wardrobe that can deal with the worst weather is key when you have to get out and ride in all seasons. Keeping your feet warm and dry will make your commute or foul weather ride easier and more comfortable. - Open soles framed by abrasion resistant material - Ideal to wear with cycling and leisure shoes - Lightweight material for easy storage - GORE-TEX Product: durably waterproof, windproof and extremely breathable - Reflective details at front, back and side - Reflective transfer print to mark right and left - Back velcro width adjustment
Sidi's Caliper Straps are compatible with their Caliper Buckles (sold separately) to deliver a secure fit with the Soft Instep Closure System.
- Replacement straps for Sidi Shoes - 15mm width - Compatible with 2011 and newer shoes - Buckles sold separately
The classic must-have ELITE Thermal Toe Covers are updated with reflective logos. Features: ELITE Softshell provides superior wind and water protection Simple pull-on design Reflective elements for low–light visibility Recommended for road shoes with external cleats Top: 70% nylon, 15% spandex, 15% polyurethane, Bottom: 93% nylon, 7% spandex, Imported.
Designed for the nastiest, frigid conditions, the Pearl Izumi P.R.O. AmFIB WxB Shoe Covers transform your road shoes, allowing them to thrive year round. Primaloft Gold insulation and P.R.O. Barrier WxB fabric with an Outdry membrane provides waterproof, breathable coverage to keep feet toasty. Kevlar bottoms and rubber reinforcements on the toes add durability to the high-wear areas. The best part: Pearl's patented two-stage hook-and-loop closure makes these covers easy to put on and take off, while ensuring a snug fit against both your shoe and ankle. Features: - P.R.O. Barrier WxB powered by Outdry provides optimal water protection by bonding the waterproof, breathable membrane directly to the interior of the shell fabric - 100g Primaloft Gold insulation provides optimal warmth without bulk - Updated two-stage hook and loop closure provides both sleek fit and easy on and off - Anatomic paneling for a performance fit - Kevlar road bottom spreads open for easy on and off while providing superior durability - Recommended for road shoes with external cleats - Reflective elements for low-light visibility - Shell: 100% polyester; Insulation: 100% polyester; Bottom: 59% nylon 25% Kevlar aramid 16% polyurethane
Pearl Izumi's thinnest, lightest and most aerodynamic shoe cover is perfect for racing or riding in cool, windy conditions. It's made with a breathable P.R.O. Barrier Lite fabric that stretches to optimize your aero advantage while keeping your feet dry and comfortable. It also features a zippered rear closure for improved aerodynamics. Features: - P.R.O. Barrier Lite fabric provides lightweight wind protection and water resistance - Wind tunnel tested for aerodynamics - Zippered heel closure for improved fit and improved aerodynamics - Recommended for road shoes with external cleats - Upper: 50% nylon 40% polyurethane 10% elastane; Bottom: 59% nylon 25% Kevlar aramid 16% polyurethane; Imported
Sugoi's Resistor Aero Shoe Covers provide lightweight, aerodynamic wind protection. Made from stretch Lycra with a water-resistant coating, they're also great for cool, damp rides. The offset rear zipper makes for an easy on/off and a comfortable fit. • PU coated stretch Lycra offers lightweight wind and waterproof protection • Offset rear zip to eliminate Achilles tendon pressure point
Keep your toes toasty in harsh conditions with Pearl Izumi's Elite Softshell MTB Shoe Covers. Their 3-layer wind and waterproof Softshell fabric makes these booties extremely warm. Plus, these fine covers have tall cuffs to seal out the elements, reflective accents for visibility, Kevlar bottoms that fit treaded mountain bike shoes, and 2-stage hook-and-loop closures for easy on/off.
Fully taped seam sealed water protection, constructed with Zap fabric for ultra-visibility, a modern staple for commuting and low-light training rides. • A versatile bootie with a relaxed fit • Hook-and-loop rear closure offers a wide range of fit depending on shoe profile FABRIC: ZAP WOVEN, HYDROSHIELD-VENDOR SOURCE FABRIC BLEND: 60% POLYESTER, 25% MICRO-GLASS BEADS, 15% POLYURETHANE FABRIC METRICS: 3.54 OZ/YD2 120 GSM
The utilization of GORE WINDSTOPPER material on these overshoes provides a low bulk solution to keep your feet warm. The flexible and breathable WINDSTOPPER material will fit snuggly to your shoes to prevent flapping and maximize moisture management. - Soft and versatile GORE WINDSTOPPER Product: windproof, water repellent and highly breathable - Elastic back for maximum comfort and fit - Thermo lining: Increases warmth; brushed and soft back for next-to-skin comfort - Reflective logo and piping - Fully taped seams for increased protection - Zipper closure
Keeping your extremities warm and dry is a big battle when you're riding in cool weather. GORE-TEX fabric is put to good use on these shoe covers, allowing you to commute to work and keep your feet totally dry in the process. - Abrasion resistant material at sole - GORE-TEX Product: durably waterproof, windproof and extremely breathable - Elastic cuffs - Reflective details at front, back and side - Pull tab on heel - Adjustable velcro strap on sole for a perfect fit - Zip tags for easy opening
The Ergon TP1 Pedal Cleat Tool is the first tool for precisely and easily adjusting cycling shoes cleats. The ergonomically correct position of the feet on the pedals plays a crucial role in injury prevention and is also important for maximizing both performance and comfort.
The Keo Cover protects your cleats while walking. They are compatible with all Keo Grip cleats and Keo Cleats. – Cleats protection – Anti-slip – Compatible with all cleats
These lightweight and low bulk overshoes are a great compromise when you need to keep your feet warm, but don't want to restrict pedaling movement. Completely windproof, you'll instantly feel more comfortable on every training ride in the wind. - Reflective logo on side - Fabric with versatile, medium thermal protection - GORE WINDSTOPPER Product: totally windproof, extremely breathable and water repellent - Elastic cuffs - Reflective piping on back - Elastic back for maximum comfort and fit
Cleats with a more forgiving 10-deg release. - Optimized for novice riders or those new to clip-in pedals - 10-deg release angle makes it easier to unclip - 2-hole bolt pattern for mountain bike shoes - Plastic spacing shims included - Compatible with all Crankbrothers clip-in pedals
These GORE WINDSTOPPER overshoes with PrimaLoft insulation are for the coldest days. A full-length zip ensures you can get them on and off easily, while the flexible material and carefully contoured design will not hinder your pedal stroke. - Soft and versatile GORE WINDSTOPPER Product: windproof, water repellent and highly breathable - Insulation Protection: Integrated low-bulk insulation maximizes warmth while maintaining mobility - Zip tags for easy opening - Heel pull tab for easy on and off - Abrasion resistant material at sole and toes - Elastic cuffs - Adjustable Velcro strap on sole for perfect fit - Reflective details
There are some chilly days when you know that a pair of shoe covers will be overkill, but you'd rather keep your toes warm and worry about riding instead. That's where these toe covers fit in. They will keep your feet warm on cold and dry days. - Cut-outs for all current pedal systems - Reflective details at front - Fabric with versatile, medium thermal protection - GORE WINDSTOPPER Product: totally windproof, extremely breathable and water repellent - Lightweight material for easy storage - Reflective transfer print to mark right and left
Page 1 of 1