Other

- Use in conjunction with Clip-On Team or Pro Aerobar base units - Aluminum extension pair with 22.2mm diameter - 305mm maximum extension from centerline of bar clamp

A traditional saddle clamp for use with vintage, older and inexpensive seatposts without an integrated clamp. - For use only with plain/pin-style seatposts that require a separate saddle clamping mechanism at the top - One bolt tightens the clamp to the rest of the seatpost and to the saddle rails at the same time. - 22.2mm / 7/8 fit with angle adjustment via serrated washers - Steel construction with ED black finish

Fun handlebar-mount streamers. - Quick and easy installation

Forged Alloy seat-clamp with QR lever.

- Noodle/Boot completely seal brake cable, upgrades most linear brakes

Disc Brake Adapters

The new design allows for internal mounting which not only offers the obvious aerodynamic benefits associated with hiding a component inside the frame but also keeps the unit protected from the elements and impact. The EPS V2 Power Unit is an improvement with regards to aerodynamics, versatility, durability and protection but also plays a pivotal role in an aspect that is not to be overlooked; aesthetics. The EPS V2 Power Unit gives the cyclist the possibility to use the most advanced groupset while maintaining sleekest look to his or her ride. The brain of the system. The EPS Power Unit is much more than just a battery. Its housing contains all the electronics of the EPS drivetrain, the system memory input/output gates and the battery charger plug. This design choice benefits both the reliability and the performance of the system, which is also upgradeable. - 130g

Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. - Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series - Integral mold seals keep out the elements - Compatible with 52mm lower headset bearings - Compatible with 30mm (1-1/8") straight steerer tubes - Durable steel construction - Allows the installation of a straight steerer fork without changing out the headset lower

Our Seatpost Adapters quite literally fill the gap, and with over 25 sizes available, the combinations are endless. These Seatpost Adapters are compatible with static, suspension and dropper Seatposts.

Hellbender bearings have an improved seal structure and are cross compatible with Cane Creek headsets.

Crank Insurance compatible with HollowGram cranks. Features - Protects HollowGram crank arm from rock strikes - Reflective strip keeps riders visible

Get the DownLow. Our DownLow dropper post is an infinitely adjustable, easily serviceable, air/hydraulic unit with a sweet cable remote. It goes up. It goes down. You need one. Where it thrives: Challenging trails, up and down hills What it's built for: Handling, confidence Highlights: - 31.6 diameter - Alloy construction with slot key bushings and wiper seals - Preset airspring for no-fuss setup

Entirely developed, designed, and produced in Denmark by CeramicSpeed, the Oversized Pulley Wheel System for SRAM will improve your competitive advantage. The unique oversized design provides riders of this Oversized Pulley Wheel System with efficiency savings starting at 40% over stock SRAM derailleur pulley wheels. This specific SRAM Mechanical version of the Oversized Pulley Wheel System is only compatible with SRAM Red and SRAM Force—10- and 11-speed derailleurs and works with both short cage & WiFli derailleur bodies. - This system for SRAM features two oversized 17-tooth aluminum pulley wheels housed within a robust cage crafted from polyamide (PA) and carbon fiber. - The OSPW System for SRAM fits up to 32-tooth cassettes. - The typical overall power savings of the OSPW System for SRAM Mechanical is 40%-60% over a stock setup. - The oversized pulley wheels have a lifespan that is 3-5 times longer than the commonly used standard pulleys on the market. In The Box: - Oversized Pulley Wheel System - CeramicSpeed Bearing Oil in 15ml dropper bottle - Sticker Sheet

DT Swiss Sinc Ceramic cartridge bearings. - The black dust cover is intended to be installed facing the hub and the tan seal is intended to face externally

DT Swiss Sinc Ceramic cartridge bearings. - The black dust cover is intended to be installed facing the hub and the tan seal is intended to face externally

Ratchet freehub bodies have a gloss finish and don't have a seal, as this is fixed on the hub shell. The Ratchet System was the first of this type for DT Swiss; used in the mid-range products like the 350 hubs. Includes end cap for 12 x 142 and 12 x 148mm hubs Fits Shimano 12-speed Micro Spline cassettes Crafted from lightweight aluminum Compatible with 12mm thru-axles

Electra's Townie Quick-Release Seatpost Collar offers a little extra bling and convenience to your Townie bike because it allows no-tools seat-height adjustment. This quality metal clamp is easy to install and use and it securely fastens your seatpost in place.

- Grade 10 chromium steel balls

- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity - No retainer means these bearings have 40 percent more capacity

- Made of forged aluminum - Quality chrome-plated bolt and superior finish - Black

- CNC machined 6061-T6 alloy - Extra long 72mm clamping lever - Provides extra leverage - 13mm clamp height

- Integrated QR skewer - 6061-T6 alloy - Stainless steel bushing - Black

- 6061 Aluminium clamp - With integrated M5 eyelets - Enables the installation of a rear rack on a bike without eyelets - Black

Rebuild seal kits for Fox rear suspension service and repair. - Includes parts needed for rebuild

Your frame is BB30 or PF30. Your crank is 386EVO. No sweat. This adapter from FSA makes it happen. - For road use - Weight: 50g

Jagwire's Brake or Shift Cable Tips are made of lightweight, corrosion-resistant and durable aluminum and are the right size to nicely fit over the ends of up to 1.8mm-diameter cables. These caps are crimped in place on the cables to prevent fraying and ensure your cables last a long time. The tips come in colors to add a little style to your bike.

Fits Ibis Mojo HD and Mojo HD 140 Features: - CNC machined from 6061 T6 Aluminum - Anodized pewter finish - Model: NSB DH0069

- Enough clamp bolts for 4 clamps

- Clamps on to dual-Crown fork stanchions to prevent damage to frame - Easy to install and adjust, More secure and lower profile than stock bumpers - Molded loops allow clean and easy zip-Tie number plate mounting - Available for 35mm boxxer or 40mm fox stanchions, Sold in pairs

• Supplied as set of 5 pcs (2x2mm, 1x5mm, 1x10mm and 1x20mm) • Available in 1/8 inch • Color: Black