Skip to main content

Filter By:

  • Show More Sizes
  • Show Fewer Sizes

Headsets

$49.99
This is the Top Cover for the Cane Creek 40 Series ZeroStack headset. Please contact us if you have any questions about which parts are correct for your headset.
$169.99
Backed by a 110-year warranty and constructed in Fletcher, NC, the 110-Series headset is designed with no compromises in quality, durability, or finish quality. Integrated bearings fit directly into compatible head tubes without the need of a bearing press. - Sealed stainless steel bearings - Carbon-friendy compression ring captured in top cover, keeping shims in place - 7075 T-6 aluminum cups machined in Fletcher, NC - Aluminum dual seal crown race protects lower bearing - Interlok spacer compatible - 110 year warranty
$164.99
Building upon Cane Creek's ongoing legacy of bicycle headset innovation, the introduction of the New Hellbender 70 Visco brings new patented steering stabilizing technology to a wide variety of cycling disciplines. Designed to reduce high-frequency oscillation of the bicycle steering assembly, known as speed wobble. The Cane Creek Hellbender 70 Visco headset helps riders maintain control, reduce fatigue and ride with confidence. -Stabilized steering with Cane Creek’s Patented headset damping technology; utilizing Micro-thin plates with fluorocarbon gel in between -Includes a pre-set “mid-tune” damping, each layer; Damping effects are tunable for rider preference -7075 T6 Aluminum construction -Sealed, stainless-steel Hellbender bearings
$209.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 110 Series has light, tough, and beautiful machined 7075 T6-aluminum cups that are contoured and relieved for even more gram shaving and strength. You also get top-quality split-lip sealed stainless-steel bearings, a carbon-friendly captured compression ring and a dual-sealed crown race and complete upper bearing seal to keep the grease in and the dirt out. What's more, the seals are low-friction to improve steering performance and there are no loose headset parts so maintenance is easy. The 110 comes with an amazing 110-year, no-questions-asked warranty too!
$114.99
Backed by a 110-year warranty and constructed in Fletcher, NC, the 110-Series headset is designed with no compromises in quality, durability, or finish quality. Integrated bearings fit directly into compatible head tubes without the need of a bearing press. - Sealed stainless steel bearings - Carbon-friendy compression ring captured in top cover, keeping shims in place - 7075 T-6 aluminum cups machined in Fletcher, NC - Interlok spacer compatible - 110 year warranty
$104.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 110 headsets. • Technical Description: EC44/40/H12/x • Bottom Type: EC - External Cup • Bottom Head Tube Inside Dia.: 44.00mm • Crown Race Seat Dia.: 39.76mm • Crown Race Type: Aluminum, Dual-Seal • Bottom Stack Height: 12mm • Bottom Bearing Type: Top-quality, sealed stainless steel bearings • Material: 7075 aluminum • Weight: 61.02g
$59.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets. • Technical Description: ZS49/28.6/H8/K • Top Type: ZS - ZeroStack • Top Head Tube Inside Dia.: 49.61mm • Stem Clamp Dia.: 28.6mm • Top Stack Height: 8mm • Top Bearing Type: Black Oxide, Sealed • Material: 6061 aluminum • Weight: 57g
$42.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets. • Technical Description: IS52/30/H1 • Bottom Type: IS - Integrated • Bottom Head Tube Inside Dia.: 52.1mm • Crown Race Seat Dia.: 30.015mm • Crown Race Type: Steel, Face-Sealed • Bottom Stack Height: 1mm • Bottom Bearing Type: Black Oxide, Sealed • Material: N/A • Weight: 72g
$35.99
Cane Creek's 10 Series has light, tough, and beautiful machined 6061 T6-aluminum cups, Cane Creek's corrosion-resistant black-oxide angular-contact bearings and quality seals throughout to keep the grease in and the dirt out. • Technical Description: ZS56/40/H4/K • Bottom Type: ZS - ZeroStack • Bottom Head Tube Inside Dia.: 55.95mm • Crown Race Seat Dia.: 39.79mm • Crown Race Type: Polymer • Bottom Stack Height: 4mm • Bottom Bearing Type: Black Oxide • Material: 6061 aluminum • Weight: 35.35g
$89.99
Hellbender 70 Slam Top Assembly headset.
$79.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 110 headsets. - Technical Description: EC34/30/H12/x - Bottom Type: EC - External Cup - Bottom Head Tube Inside Dia.: 33.95mm - Crown Race Seat Dia.: 30.015mm - Crown Race Type: Aluminum, Dual-Seal - Bottom Stack Height: 12mm - Bottom Bearing Type: Top-quality, sealed stainless steel bearings - Material: 7075 aluminum - Weight: 42.20g
$99.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 40 Series has light, tough, and beautiful machined 6061 T6-aluminum cups that are internally relieved for even more gram shaving. You also get Cane Creek's corrosion-resistant black-oxide sealed bearings and quality seals throughout to keep the grease in and the dirt out, including Cane Creek's Clip Seal that completely seals the top assembly.
$59.99
This is the Bottom External Cup for the Cane Creek 40 Series headset. Please contact us if you have any questions about which parts are correct for your headset.
$59.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets. • Technical Description: ZS56/30/H4/K • Bottom Type: ZS - ZeroStack • Bottom Head Tube Inside Dia.: 55.95mm • Crown Race Seat Dia.: 30.015mm • Crown Race Type: Steel, Face-Sealed • Bottom Stack Height: 4mm • Bottom Bearing Type: Black Oxide, Sealed • Material: 6061 aluminum • Weight: 88g
Previous page Page 2 of 2