Filter By:
- Hardtail (34)
- Full-Suspension (81)
- 29-Inch Wheel (29ers) (95)
- 650B Wheel (54)
- Fat Bikes (5)
- Downhill (1)
- Rigid (7)
- Dirt Jump (4)
- Show More Categories
- Mountain Frames (14)
- 27.5-Inch Plus Wheel (7)
- 26-Inch Wheel (2)
- Show Fewer Categories
- Show More Sizes
- Show Fewer Sizes
Mountain
$5,049.00
Whether you're carving down a steep loam line, dropping in for an enduro stage, or heading into the backcountry for an all-day epic, this bike performs. With increased rearward axle path, idler, and the innovative VPSHP suspension layout, this new design gives the Sight next level confidence and capability, up or down the mountain. With 160/150mm of travel, the 2024 Sight takes the best of the Range Platform and has tighten it up into a light, pedal friendly, maneuverable, high-pivot package.
Available with a 27.5" rear wheel (MX), as well as 29" in some markets. Swapping the linkarm and lower shock mount with the "Missing Link Kit" converts between 27.5" and 29" to let you pick the wheelsize that suits you best while maintaining geometry and kinematics to ensure consistent fit and bike setup.
- 29" with the option to change to 29"/27.5" with no compromise geometry and kinematics.
- Fox Float suspension.
- Co-molded frame protection.
- Weight (S3): 16.9 kg / 37.3 lbs
- Ride AlignedTM – Perfect fit, dialed handling and personalized setup in minutes.
- New No Other Way Limited Lifetime Warranty
$4,499.00
Generation Next.
The Sight Youth 27.5" lets 4’9” – 5’2” shredders step things up sooner.
With generous standover clearance, youth-tuned suspension, and kid-sized touchpoints will help them capitalize on the rubber bones and questionable judgement that youth provides.
Lighter rider, lighter springs, lighter damping.
Suspension is tuned specifically to react perfectly under lighter riders with reduced offset RockShox Pike fork and a Fox Float X2 Performance Elite rear shock with custom light tune.
Light action adjustable post built for smaller riders.
If you weigh less than 90?pounds, normal droppers are too hard to compress. The 120mm?light action TranzX?dropper post compresses easily for quick saddle adjustments in hairy situations.
Size appropriate rider contact for comfort and control.
SDG’s Junior saddle, pedals and grips provide the same quality and performance as the adult sized ones, but won't fit kids like they're built for giants.
SX Eagle components shift great and are rock solid.
One-by drivetrains are pretty much the only way to go these days, and SX Eagle brings top-drawer performance that won't break the bank when the learning curve gets steep.
- 4’9” – 5’2” shredders get to step things up sooner.
- Suspension and dropper post tuned perfectly for lighter riders.
- Size appropriate rider contact for comfort and control.
- Rock solid SX Eagle components that shift great.
$5,149.00
Whether you're carving down a steep loam line, dropping in for an enduro stage, or heading into the backcountry for an all-day epic, this bike performs. With increased rearward axle path, idler, and the innovative VPSHP suspension layout, this new design gives the Sight next level confidence and capability, up or down the mountain. With 160/150mm of travel, the 2024 Sight takes the best of the Range Platform and has tighten it up into a light, pedal friendly, maneuverable, high-pivot package.
Available with a 27.5" rear wheel (MX), as well as 29" in some markets. Swapping the linkarm and lower shock mount with the "Missing Link Kit" converts between 27.5" and 29" to let you pick the wheelsize that suits you best while maintaining geometry and kinematics to ensure consistent fit and bike setup.
- Rockshox Vivid ULTIMATE
- Co-molded frame protection.
- Missing Link Kits for wheel size conversion.
- Weight (S3): 3.2 kg / 6.9 lbs
- Ride AlignedTM – Perfect fit, dialed handling and personalized setup in minutes.
- New No Other Way Limited Lifetime Warranty
$6,999.00
Whether you're carving down a steep loam line, dropping in for an enduro stage, or heading into the backcountry for an all-day epic, this bike performs. With increased rearward axle path, idler, and the innovative VPSHP suspension layout, this new design gives the Sight next level confidence and capability, up or down the mountain. With 160/150mm of travel, the 2024 Sight takes the best of the Range Platform and has tighten it up into a light, pedal friendly, maneuverable, high-pivot package.
Available with a 27.5" rear wheel (MX), as well as 29" in some markets. Swapping the linkarm and lower shock mount with the "Missing Link Kit" converts between 27.5" and 29" to let you pick the wheelsize that suits you best while maintaining geometry and kinematics to ensure consistent fit and bike setup.
- 29" with the option to change to 29"/27.5" with no compromise geometry and kinematics.
- RockShox select suspension.
- Co-molded frame protection.
- Weight (S3): 15.7 kg / 34.6 lbs
- Ride AlignedTM – Perfect fit, dialed handling and personalized setup in minutes.
- No Other Way Limited Lifetime Warranty
$8,099.00
Whether you're carving down a steep loam line, dropping in for an enduro stage, or heading into the backcountry for an all-day epic, this bike performs. With increased rearward axle path, idler, and the innovative VPSHP suspension layout, this new design gives the Sight next level confidence and capability, up or down the mountain. With 160/150mm of travel, the 2024 Sight takes the best of the Range Platform and has tighten it up into a light, pedal friendly, maneuverable, high-pivot package.
Available with a 27.5" rear wheel (MX), as well as 29" in some markets. Swapping the linkarm and lower shock mount with the "Missing Link Kit" converts between 27.5" and 29" to let you pick the wheelsize that suits you best while maintaining geometry and kinematics to ensure consistent fit and bike setup.
- 29" with the option to change to 29"/27.5" with no compromise geometry and kinematics.
- RockShox Ultimate suspension. SRAM Code Silver Stealth Brakes.
- Race face carbon 30mm rims.
- SRAM XO Eagle Transmission.
- Weight (S3): 15.6 kg / 34.4 lbs
- Ride AlignedTM – Perfect fit, dialed handling and personalized setup in minutes.
- No Other Way Limited Lifetime Warranty
$12,999.00
Whether you're carving down a steep loam line, dropping in for an enduro stage, or heading into the backcountry for an all-day epic, this bike performs. With increased rearward axle path, idler, and the innovative VPSHP suspension layout, this new design gives the Sight next level confidence and capability, up or down the mountain. With 160/150mm of travel, the 2024 Sight takes the best of the Range Platform and has tighten it up into a light, pedal friendly, maneuverable, high-pivot package.
Available with a 27.5" rear wheel (MX), as well as 29" in some markets. Swapping the linkarm and lower shock mount with the "Missing Link Kit" converts between 27.5" and 29" to let you pick the wheelsize that suits you best while maintaining geometry and kinematics to ensure consistent fit and bike setup.
- RockShox Ultimate Flight Attendant suspension.
- 29" with the option to change to 29"/27.5" with no compromise geometry and kinematics.
- SRAM Code Ultimate Stealth Brakes.
- We Are One or Race Face carbon 30mm rims.
- SRAM XO EaglE Transmission.
- Weight (S3): 15.1 kg / 33.3 lbs
- Ride AlignedTM – Perfect fit, dialed handling and personalized setup in minutes.
- No Other Way Limited Lifetime Warranty
$6,799.00
Whether you're ripping fast flowy singletrack, putting the power down on punchy climbs, or tearing the tires off in the corners, the Optic continues to push the boundaries of what's possible on a short travel trail bike.
The new Optic with 140mm/125mm of travel condenses years of technology from our long travel bikes into a lightweight package that's as ready to tear up climbs as it is tackling challenging descents. The VPSHP suspension layout provides increased rearward axle path and an idler to manage pedal feedback, keeping Optic's playful roots, while punching above its weight when the trails get rough.
Available with a 27.5" rear wheel (MX), as well as 29" in some markets. Swapping the linkarm and lower shock mount with the "Missing Link Kit" converts between 27.5" and 29" to let you pick the wheelsize that suits you best, while maintaining geometry and kinematics to ensure consistent fit and bike setup.
- Carbon front triangle, seatstay and chainstay, 125mm of travel, threaded BB.
- Ride Aligned with Norco design kinematic, High pivot Horst Link and non-concentric idler.
- 29"/27.5" (with the option to change to 29") with no compromise geometry and kinematics.
- RockShox Pike Select+ Charger RC, DebonAir
- Weight (S3): 15 kg / 34.1 lbs
- Ride AlignedTM – Perfect fit, dialed handling and personalized setup in minutes.
- No Other Way Limited Lifetime Warranty
$6,999.00
Whether you're carving down a steep loam line, dropping in for an enduro stage, or heading into the backcountry for an all-day epic, this bike performs. With increased rearward axle path, idler, and the innovative VPSHP suspension layout, this new design gives the Sight next level confidence and capability, up or down the mountain. With 160/150mm of travel, the 2024 Sight takes the best of the Range Platform and has tighten it up into a light, pedal friendly, maneuverable, high-pivot package.
Available with a 27.5" rear wheel (MX), as well as 29" in some markets. Swapping the linkarm and lower shock mount with the "Missing Link Kit" converts between 27.5" and 29" to let you pick the wheelsize that suits you best while maintaining geometry and kinematics to ensure consistent fit and bike setup.
- 29" with the option to change to 29"/27.5" with no compromise geometry and kinematics.
- Rockshox Lyrik and Vivid air shock.
- TranzX dropper post with long-travel size-specific drop and fine tune adjustment. Co-molded frame protection.
- Co-molded frame protection.
- Weight (S3): 16.1 kg / 35.5 lbs
- Ride AlignedTM – Perfect fit, dialed handling and personalized setup in minutes.
- No Other Way Limited Lifetime Warranty
$3,449.00
The Reaper packs the same aggressive trail performance found in our full suspension bikes like the Altitude and Instinct, but in a smaller package for young rippers. Don't fear the Reaper.
The Reaper can tear up singletrack, smash technical descents, and slay bike park laps all day long.
- High-performance trail bike for young riders
- Wide range gearing
- High-performance tires
- Ride-9 Geometry adjustment tailors bike to suit the rider & terrain
- Compatible with 26" x 2.8 wheels
- Travel increased to 150mm front & 140mm rear for all-mountain shredding
- New Shimano I-Spec EV brakes for an uncluttered cockpit
- New wide-range Shimano drivetrain for all-mountain reliability
- Wider rims and tires for confidence and control
- Tubeless-ready out of the box
$5,499.00
RIPLEY AF
The Ripley AF is our beloved, category-defying, short-travel, singletrack-scorching Ripley - rendered in aluminum, with more aggressive geometry. All the sizzle and pop of the carbon Ripley, now available as a complete bike at a wallet friendly price.
MODERN GEOMETRY, PRECISE HANDLING
A trail-friendly 65.5-degree head angle and short (44mm) offset 130mm fork combined with 29” wheels makes for a super planted but still playful front end feel. A 76-degree seat angle puts your power directly to the pedals, while the short chainstays and pedal-friendly dw-link kinematics deliver that power without squandering a single watt.
DW LINK SUSPENSION
Our 15-year collaboration with Dave Weagle has yielded yet another bike with unparalleled climbing efficiency and tractability. Incredible snap and responsiveness are its trademarks, and a whole mess of plush, chunder-eating, downhill-crushing goodness gets thrown in for good measure. Wrap that together and you get the best suspension you’ll find anywhere. It’s that good.
LONG DROPPER POST
The Ripley AF frame is designed with clearance for long droppers in mind. Check out the ?‘Dropper Insert’ tab in the Specs & FAQs section below to find out which length of seatpost will fit your frame.
We use words like small, medium, and large to describe our sizing because it’s easy to understand, but our ultra low standovers give you the ability to size your frame based on reach and preference.
We pioneered the wide rim revolution a few years ago and inspired a new crop of wider 2.4”?—?2.6” tires. When paired together, this combo can be run at ultra-low pressures that produce elbow-dragging cornering traction without sacrificing speed.
Wheels learn warranty large
We stand behind our products. If it’s our fault, we’ll fix it. Our aluminum frames are backed by the same 7 year warranty and excellent customer service as our carbon products.
$12,499.00
Introducing the HD6, the evolution of one of the most successful enduro bikes in history. Designed with input from our Enduro World Cup team and building upon our award-winning Ripmo and HD lines, the HD6 features increased travel, a completely redesigned suspension layout, and mixed wheels.
GEOMETRY
The 29" front wheel, bolstered by 180mm of travel, assures stability, whereas the 27.5" rear wheel allows for additional maneuverability. The 165mm of travel skillfully manages any fallout. With a 64-degree head tube angle (one-degree slacker than the current Ripmo), a BB height similar to Mojo HD5, and chainstay length identical to the current Ripmo (despite the 27.5" rear wheel), the bike maintains an equilibrium between agility and stability.
FIVE SIZES
In order to place every size rider in the same position over the rear wheel, the HD's seat tube angles get steeper as frame size increases. With four sizes, this would have resulted in larger jumps in reach, so we added a fifth size. The smaller increments across five sizes means that you can find just the right size. We encourage riders to choose their bike size based on their desired reach and top tube measurements.
COIL COMPATIBLE
Our upper link suspension layout is progressive enough to be sensitive off the top, yet supportive enough for the biggest hits. It is also compatible with all coil shocks, for those longer race stages that can tax air shock performance.
DW-LINK
The suspension layout may be new, but it's still DW-Link. The inherent efficiency means you don't need an overdamped shock to climb well. Less shock damping allows the wheels to stay planted on the ground, providing more traction and that hover-bike feel that our frames are known for. The HD6 climbs with a finesse that defies its enduro race pedigree.
TRACTION TUNE
Our custom tuned front and rear suspension feature extra light high speed compression and rebound damping to deliver unparalleled traction. This allows the wheels to flutter through rough terrain like a trophy truck storming through a set of whoops.
BUSHINGS
Tired of buying bearings each season? So were we. That's why we've strategically employed bushings where they're most effective and bearings elsewhere. The IGUS bushings in our lower link are not only lighter and stiffer, they're virtually maintenance-free. We believe so strongly in them, we back them with free lifetime replacement.
LIGHTWEIGHT PREMIUM CARBON
All our bikes are built from the highest grade materials and optimized for the best strength, weight, stiffness, and ride performance, no matter how much you spend. The HD6 frame is sub 6 lbs without shock and our complete Enduro ready builds weigh as little as 32 lbs.
INTERNAL CABLE ROUTING
Bikes that look pretty on the outside should look pretty on the inside. We use carbon fiber tubes molded within each frame. Push the cable in, watch it pop out a beautiful moment indeed.
PROTECT YOUR INVESTMENT
A thick rubber downtube protector deflects debris, while our chainstay protector features thick raised sections to help dampen chain slap noise. And our simple-yet-elegant linkage protectors stop mud and rocks thrown by the tire, keeping your beautiful bike beautiful.
LIFETIME WARRANTY
If it's our fault, we'll fix it. Simple as that.
$11,599.00
Introducing the HD6, the evolution of one of the most successful enduro bikes in history. Designed with input from our Enduro World Cup team and building upon our award-winning Ripmo and HD lines, the HD6 features increased travel, a completely redesigned suspension layout, and mixed wheels.
GEOMETRY
The 29" front wheel, bolstered by 180mm of travel, assures stability, whereas the 27.5" rear wheel allows for additional maneuverability. The 165mm of travel skillfully manages any fallout. With a 64-degree head tube angle (one-degree slacker than the current Ripmo), a BB height similar to Mojo HD5, and chainstay length identical to the current Ripmo (despite the 27.5" rear wheel), the bike maintains an equilibrium between agility and stability.
FIVE SIZES
In order to place every size rider in the same position over the rear wheel, the HD's seat tube angles get steeper as frame size increases. With four sizes, this would have resulted in larger jumps in reach, so we added a fifth size. The smaller increments across five sizes means that you can find just the right size. We encourage riders to choose their bike size based on their desired reach and top tube measurements.
COIL COMPATIBLE
Our upper link suspension layout is progressive enough to be sensitive off the top, yet supportive enough for the biggest hits. It is also compatible with all coil shocks, for those longer race stages that can tax air shock performance.
DW-LINK
The suspension layout may be new, but it's still DW-Link. The inherent efficiency means you don't need an overdamped shock to climb well. Less shock damping allows the wheels to stay planted on the ground, providing more traction and that hover-bike feel that our frames are known for. The HD6 climbs with a finesse that defies its enduro race pedigree.
TRACTION TUNE
Our custom tuned front and rear suspension feature extra light high speed compression and rebound damping to deliver unparalleled traction. This allows the wheels to flutter through rough terrain like a trophy truck storming through a set of whoops.
BUSHINGS
Tired of buying bearings each season? So were we. That's why we've strategically employed bushings where they're most effective and bearings elsewhere. The IGUS bushings in our lower link are not only lighter and stiffer, they're virtually maintenance-free. We believe so strongly in them, we back them with free lifetime replacement.
LIGHTWEIGHT PREMIUM CARBON
All our bikes are built from the highest grade materials and optimized for the best strength, weight, stiffness, and ride performance, no matter how much you spend. The HD6 frame is sub 6 lbs without shock and our complete Enduro ready builds weigh as little as 32 lbs.
INTERNAL CABLE ROUTING
Bikes that look pretty on the outside should look pretty on the inside. We use carbon fiber tubes molded within each frame. Push the cable in, watch it pop out a beautiful moment indeed.
PROTECT YOUR INVESTMENT
A thick rubber downtube protector deflects debris, while our chainstay protector features thick raised sections to help dampen chain slap noise. And our simple-yet-elegant linkage protectors stop mud and rocks thrown by the tire, keeping your beautiful bike beautiful.
LIFETIME WARRANTY
If it's our fault, we'll fix it. Simple as that.
$10,499.00
Introducing the HD6, the evolution of one of the most successful enduro bikes in history. Designed with input from our Enduro World Cup team and building upon our award-winning Ripmo and HD lines, the HD6 features increased travel, a completely redesigned suspension layout, and mixed wheels.
GEOMETRY
The 29" front wheel, bolstered by 180mm of travel, assures stability, whereas the 27.5" rear wheel allows for additional maneuverability. The 165mm of travel skillfully manages any fallout. With a 64-degree head tube angle (one-degree slacker than the current Ripmo), a BB height similar to Mojo HD5, and chainstay length identical to the current Ripmo (despite the 27.5" rear wheel), the bike maintains an equilibrium between agility and stability.
FIVE SIZES
In order to place every size rider in the same position over the rear wheel, the HD's seat tube angles get steeper as frame size increases. With four sizes, this would have resulted in larger jumps in reach, so we added a fifth size. The smaller increments across five sizes means that you can find just the right size. We encourage riders to choose their bike size based on their desired reach and top tube measurements.
COIL COMPATIBLE
Our upper link suspension layout is progressive enough to be sensitive off the top, yet supportive enough for the biggest hits. It is also compatible with all coil shocks, for those longer race stages that can tax air shock performance.
DW-LINK
The suspension layout may be new, but it's still DW-Link. The inherent efficiency means you don't need an overdamped shock to climb well. Less shock damping allows the wheels to stay planted on the ground, providing more traction and that hover-bike feel that our frames are known for. The HD6 climbs with a finesse that defies its enduro race pedigree.
TRACTION TUNE
Our custom tuned front and rear suspension feature extra light high speed compression and rebound damping to deliver unparalleled traction. This allows the wheels to flutter through rough terrain like a trophy truck storming through a set of whoops.
BUSHINGS
Tired of buying bearings each season? So were we. That's why we've strategically employed bushings where they're most effective and bearings elsewhere. The IGUS bushings in our lower link are not only lighter and stiffer, they're virtually maintenance-free. We believe so strongly in them, we back them with free lifetime replacement.
LIGHTWEIGHT PREMIUM CARBON
All our bikes are built from the highest grade materials and optimized for the best strength, weight, stiffness, and ride performance, no matter how much you spend. The HD6 frame is sub 6 lbs without shock and our complete Enduro ready builds weigh as little as 32 lbs.
INTERNAL CABLE ROUTING
Bikes that look pretty on the outside should look pretty on the inside. We use carbon fiber tubes molded within each frame. Push the cable in, watch it pop out, a beautiful moment indeed.
PROTECT YOUR INVESTMENT
A thick rubber downtube protector deflects debris, while our chainstay protector features thick raised sections to help dampen chain slap noise. And our simple-yet-elegant linkage protectors stop mud and rocks thrown by the tire, keeping your beautiful bike beautiful.
LIFETIME WARRANTY
If it's our fault, we'll fix it. Simple as that.
$3,199.00
$3,999.00
20% Off
EVERY RIDER, EVERY TRAIL
The Norco Fluid can dive into corners. And carve sweeping turns. It's as happy mixing it up in the backwoods, as it is rolling local trails. It can elevate beginner riders to intermediate. And carry intermediates to expert. It can take your weekend hobby and turn it into a lifestyle.
While so many bikes are made for a specific something or somebody, what the world needs is a bike built for every rider and every trail.
That's the Norco Fluid.
RIDER BENEFITS
THREAD THE NEEDLE
- Intuitive precision handling to pick the perfect line.
- Engineered using the same Norco technology and process as our top-tier Trail bikes to give you the ride of your life no matter what path you follow.
POTENTIAL FULFILLED
- Top-tier design and features over-deliver as skills evolve.
- 6061 aluminum frame gives experienced Trail riders what they need to ride their best and helps evolving riders develop new skills and preferences without limits.
CUSTOM TUNED SUSPENSION
- Sophisticated suspension components for full-platform performance and tunability.
- Precision-engineered 130mm rear suspension features custom-tuned dampers co-developed with the shock manufacturers provides fully customized suspension setup and performance for every rider.
ROOM TO MOVE
- Long-travel droppers and generous standover get you through the rough stuff.
- Long-travel, size-specific 34.9mm dropper posts and low-slung top tubes create lots of room to move, letting you roll confidently through challenging terrain and push your limits.
PERFORMANCE FOR ALL
- Refined design and expanded size range for accessible Trail performance.
- Boutique-level fit & finish is available in 5 frame sizes, delivering superior Trail performance to riders between 5'1" and 6'7" with components selected to offer peak performance and durability.
RIDE ALIGNED
- Perfect fit, dialed handling and personalized setup in minutes.
- The Ride Aligned Design System matches each Fluid FS to the human who rides it.
- Rider-first geometry and suspension kinematics combine with custom fit and suspension tuning for personalized performance from day one.
$4,599.00
$6,099.00
25% Off
The Optic 2 SRAM is an aggressive short-travel sled that rips on descents and can get back to the top without a gondola.
The Optic C2 SRAM sharpens your view on high speed trails. The precision suspension kinematics and custom DH spec shock creates 125mm of rear travel, matched with a gravity-eating 140mm fork for the control you need to keep your mind on the trail ahead.
Reason's It's Rad
- Fast never felt this fun.
- Designed to work so you can play.
- Components selected with speed on the brain.
- Matching each Optic to the human who rides it.
$4,349.00
$5,799.00
25% Off
The Sight A2 boosts your All-Mountain confidence with incredible descending capability, adept, sure-footed climbing, and efficient pedaling.
To make the Sight Aluminum, we had to re-think how you connect with the trail.
With maximum front and rear wheel grip on climbs and descents, Sight A2 maintains momentum and cadence in technical situations and allows the suspension to move freely without absorbing drivetrain energy.
Reasons It's Rad:
- Precise tune and fit perfects every ride.
- Max standover with long travel dropper posts.
- Sweating the little stuff makes the ride better.
- Four piston brakes with 200/180mm rotors.
- Features the Ride Aligned Design System.
Wheel size:
Sizes Small – X-Large: 27.5-inch or 29-inch
$3,299.00
Lighten Up
Everything Fluid FS, Now in Carbon
Upping the ante on everybody's favorite Trail rig, the Fluid FS Carbon features a 600g lighter main triangle with all the strength and fine-tuned potential that experienced or evolving riders need.
Right now, and down the trail, too.
- Fluid FS Carbon
- Intended Use: Trail
- Frame Material: Carbon Main, 6061 Alu Stays
- Frame / Wheel Size: S, M, L, XL / 29"
- Suspension Travel – F: 140mm R: 130mm
- Suspension Platform: Horst Link
- Tire Size: 2.35" – 2.6"
Additional Features
- Ride-Aligned Design System
- Long Travel Dropper Posts (Up To 200mm)
- Low Standover
- Custom Tuned Rear Shock
- Integrated Accessory Mount
Hero-Thread the Needle
Intuitive, precision handling to pick the perfect line.
- Fluid's geometry, suspension kinematics, and precision setup have achieved near-legendary status – so why mess with a success? Fluid Carbon delivers the goods on all types of trails with a little less junk in the trunk.
Hero-Pushing the Envelope
Design & features that'll continue to impress as skills progress.
- Refining the ride and dropping 600 grams from a Trail frame benefits everyone – but only if it's up to the task. The Fluid Carbon aced every test we subjected it to in the lab, and on the trail.
Hero-Custom Tuned Suspension
Sophisticated suspension components for precision performance.
- Precision-engineered 130mm rear suspension features custom-tuned damping co-developed with shock manufacturers to provide fully customized suspension setup and performance.
Hero-Room to Move
Long-travel droppers and generous standover get you through the rough stuff.
- Long-travel, size-specific 34.9mm dropper posts, and low-slung top tubes create lots of room to move, letting you roll confidently through challenging terrain.
Hero-You Ask, Fluid Answers
Refined design for ultimate Trail performance.
- With balanced, progressive geometry, kinematics, and superior pedal efficiency, Fluid FS Carbon tackles technical terrain with confidence, and attacks high-speed pedaling sections with a big ol' grin.
Hero-Ride Aligned
Perfect fit, dialed handling, and personalized setup in minutes.
- The Ride Aligned Design System matches each Fluid FS Carbon to the human who rides it. Rider-first geometry and suspension kinematics are precision tuned in minutes with the Ride Aligned Bike Setup Guide.
$1,709.00
The Rampage 1 is the ultimate evolution in Dirt Jumpers with a light frame that gets up to speed fast with the perfect mix of agility and stability.
The Rampage 1 is Dirt Jump hungry
It's purpose-built for big air and features components hand-selected to rip.
REASONS IT'S RAD
- How your bike looks is just as important as how it rides.
- Lightweight aluminum frame built to last.
- Hand-picked components for function and reliability.
- Evolved frame features push the potential.
- Find your perfect ride.
$10,599.00
Introducing the HD6, the evolution of one of the most successful enduro bikes in history. Designed with input from our Enduro World Cup team and building upon our award-winning Ripmo and HD lines, the HD6 features increased travel, a completely redesigned suspension layout, and mixed wheels.
GEOMETRY
The 29" front wheel, bolstered by 180mm of travel, assures stability, whereas the 27.5" rear wheel allows for additional maneuverability. The 165mm of travel skillfully manages any fallout. With a 64-degree head tube angle (one-degree slacker than the current Ripmo), a BB height similar to Mojo HD5, and chainstay length identical to the current Ripmo (despite the 27.5" rear wheel), the bike maintains an equilibrium between agility and stability.
FIVE SIZES
In order to place every size rider in the same position over the rear wheel, the HD's seat tube angles get steeper as frame size increases. With four sizes, this would have resulted in larger jumps in reach, so we added a fifth size. The smaller increments across five sizes means that you can find just the right size. We encourage riders to choose their bike size based on their desired reach and top tube measurements.
COIL COMPATIBLE
Our upper link suspension layout is progressive enough to be sensitive off the top, yet supportive enough for the biggest hits. It is also compatible with all coil shocks, for those longer race stages that can tax air shock performance.
DW-LINK
The suspension layout may be new, but it's still DW-Link. The inherent efficiency means you don't need an overdamped shock to climb well. Less shock damping allows the wheels to stay planted on the ground, providing more traction and that hover-bike feel that our frames are known for. The HD6 climbs with a finesse that defies its enduro race pedigree.
TRACTION TUNE
Our custom tuned front and rear suspension feature extra light high speed compression and rebound damping to deliver unparalleled traction. This allows the wheels to flutter through rough terrain like a trophy truck storming through a set of whoops.
BUSHINGS
Tired of buying bearings each season? So were we. That's why we've strategically employed bushings where they're most effective and bearings elsewhere. The IGUS bushings in our lower link are not only lighter and stiffer, they're virtually maintenance-free. We believe so strongly in them, we back them with free lifetime replacement.
LIGHTWEIGHT PREMIUM CARBON
All our bikes are built from the highest grade materials and optimized for the best strength, weight, stiffness, and ride performance, no matter how much you spend. The HD6 frame is sub 6 lbs without shock and our complete Enduro ready builds weigh as little as 32 lbs.
INTERNAL CABLE ROUTING
Bikes that look pretty on the outside should look pretty on the inside. We use carbon fiber tubes molded within each frame. Push the cable in, watch it pop out a beautiful moment indeed.
PROTECT YOUR INVESTMENT
A thick rubber downtube protector deflects debris, while our chainstay protector features thick raised sections to help dampen chain slap noise. And our simple-yet-elegant linkage protectors stop mud and rocks thrown by the tire, keeping your beautiful bike beautiful.
LIFETIME WARRANTY
If it's our fault, we'll fix it. Simple as that.
$9,699.00
Introducing the HD6, the evolution of one of the most successful enduro bikes in history. Designed with input from our Enduro World Cup team and building upon our award-winning Ripmo and HD lines, the HD6 features increased travel, a completely redesigned suspension layout, and mixed wheels.
GEOMETRY
The 29" front wheel, bolstered by 180mm of travel, assures stability, whereas the 27.5" rear wheel allows for additional maneuverability. The 165mm of travel skillfully manages any fallout. With a 64-degree head tube angle (one-degree slacker than the current Ripmo), a BB height similar to Mojo HD5, and chainstay length identical to the current Ripmo (despite the 27.5" rear wheel), the bike maintains an equilibrium between agility and stability.
FIVE SIZES
In order to place every size rider in the same position over the rear wheel, the HD's seat tube angles get steeper as frame size increases. With four sizes, this would have resulted in larger jumps in reach, so we added a fifth size. The smaller increments across five sizes means that you can find just the right size. We encourage riders to choose their bike size based on their desired reach and top tube measurements.
COIL COMPATIBLE
Our upper link suspension layout is progressive enough to be sensitive off the top, yet supportive enough for the biggest hits. It is also compatible with all coil shocks, for those longer race stages that can tax air shock performance.
DW-LINK
The suspension layout may be new, but it's still DW-Link. The inherent efficiency means you don't need an overdamped shock to climb well. Less shock damping allows the wheels to stay planted on the ground, providing more traction and that hover-bike feel that our frames are known for. The HD6 climbs with a finesse that defies its enduro race pedigree.
TRACTION TUNE
Our custom tuned front and rear suspension feature extra light high speed compression and rebound damping to deliver unparalleled traction. This allows the wheels to flutter through rough terrain like a trophy truck storming through a set of whoops.
BUSHINGS
Tired of buying bearings each season? So were we. That's why we've strategically employed bushings where they're most effective and bearings elsewhere. The IGUS bushings in our lower link are not only lighter and stiffer, they're virtually maintenance-free. We believe so strongly in them, we back them with free lifetime replacement.
LIGHTWEIGHT PREMIUM CARBON
All our bikes are built from the highest grade materials and optimized for the best strength, weight, stiffness, and ride performance, no matter how much you spend. The HD6 frame is sub 6 lbs without shock and our complete Enduro ready builds weigh as little as 32 lbs.
INTERNAL CABLE ROUTING
Bikes that look pretty on the outside should look pretty on the inside. We use carbon fiber tubes molded within each frame. Push the cable in, watch it pop out a beautiful moment indeed.
PROTECT YOUR INVESTMENT
A thick rubber downtube protector deflects debris, while our chainstay protector features thick raised sections to help dampen chain slap noise. And our simple-yet-elegant linkage protectors stop mud and rocks thrown by the tire, keeping your beautiful bike beautiful.
LIFETIME WARRANTY
If it's our fault, we'll fix it. Simple as that.
$8,599.00
Introducing the HD6, the evolution of one of the most successful enduro bikes in history. Designed with input from our Enduro World Cup team and building upon our award-winning Ripmo and HD lines, the HD6 features increased travel, a completely redesigned suspension layout, and mixed wheels.
GEOMETRY
The 29" front wheel, bolstered by 180mm of travel, assures stability, whereas the 27.5" rear wheel allows for additional maneuverability. The 165mm of travel skillfully manages any fallout. With a 64-degree head tube angle (one degree slacker than the current Ripmo), a BB height similar to Mojo HD5, and chainstay length identical to the current Ripmo (despite the 27.5" rear wheel), the bike maintains an equilibrium between agility and stability.
FIVE SIZES
In order to place every size rider in the same position over the rear wheel, the HD's seat tube angles get steeper as frame size increases. With four sizes, this would have resulted in larger jumps in reach, so we added a fifth size. The smaller increments across five sizes means that you can find just the right size. We encourage riders to choose their bike size based on their desired reach and top tube measurements.
COIL COMPATIBLE
Our upper link suspension layout is progressive enough to be sensitive off the top, yet supportive enough for the biggest hits. It is also compatible with all coil shocks, for those longer race stages that can tax air shock performance.
DW-LINK
The suspension layout may be new, but it's still DW-Link. The inherent efficiency means you don't need an overdamped shock to climb well. Less shock damping allows the wheels to stay planted on the ground, providing more traction and that hover-bike feel that our frames are known for. The HD6 climbs with a finesse that defies its enduro race pedigree.
TRACTION TUNE
Our custom tuned front and rear suspension feature extra light high speed compression and rebound damping to deliver unparalleled traction. This allows the wheels to flutter through rough terrain like a trophy truck storming through a set of whoops.
BUSHINGS
Tired of buying bearings each season? So were we. That's why we've strategically employed bushings where they're most effective and bearings elsewhere. The IGUS bushings in our lower link are not only lighter and stiffer, they're virtually maintenance-free. We believe so strongly in them, we back them with free lifetime replacement.
LIGHTWEIGHT PREMIUM CARBON
All our bikes are built from the highest grade materials and optimized for the best strength, weight, stiffness, and ride performance, no matter how much you spend. The HD6 frame is sub 6 lbs without shock and our complete Enduro ready builds weigh as little as 32 lbs.
INTERNAL CABLE ROUTING
Bikes that look pretty on the outside should look pretty on the inside. We use carbon fiber tubes molded within each frame. Push the cable in, watch it pop out a beautiful moment indeed.
PROTECT YOUR INVESTMENT
A thick rubber downtube protector deflects debris, while our chainstay protector features thick raised sections to help dampen chain slap noise. And our simple-yet-elegant linkage protectors stop mud and rocks thrown by the tire, keeping your beautiful bike beautiful.
LIFETIME WARRANTY
If it's our fault, we'll fix it. Simple as that.
$5,174.00
$6,899.00
25% Off
The Sight A1 boosts your All-Mountain confidence with incredible descending capability, adept, sure-footed climbing, and efficient pedaling.
To make the Sight Aluminum, we had to re-think how you connect with the trail.
With maximum front and rear wheel grip on climbs and descents, Sight A1 maintains momentum and cadence in technical situations and allows the suspension to move freely without absorbing drivetrain energy.
Reasons It's Rad:
- Precise tune and fit perfects every ride.
- Max standover with long travel dropper posts.
- Sweating the little stuff makes the ride better.
- Four piston brakes with 200/180mm rotors.
- Features the Ride Aligned Design System.
Wheel size:
Sizes Small – X-Large: 27.5-inch or 29-inch
$6,029.00 - $6,699.00
$6,699.00
Up to 10% Off
Purpose-built to hit the precise sweet spot between lightweight cross country climbing prowess and technical precision, the Element is the best of both worlds and more. New-levels of climbing efficiency guarantees that oh-so-sweet feeling of riding someone off your wheel. Added levels of stability on fast descents and a pseudo-aggressive seat tube angle provides surprising levels of confidence on tight single track and hairy descents. Light. Stiff. Fast. Smooth. Precise. You’re now in your Element—always.
Wheel size:
- Size X-Small: 27.5-inch
- Sizes Small – X-Large: 29-inch
$5,799.00
Evolved over decades of freeride innovation, the Shore Park is your ultimate co-pilot on your gravity-fueled days at the bike park. With either a 200mm dual crown or a 180mm single crown fork, the Shore Park easily shrugs off deep landings and eats up rough trails, while retaining the dynamic and responsive feel required to boost jumps and rail berms.
- Long Travel, No Kickback
The Shore is designed around Norco's VPSHP suspension layout that increases the rearward axle path to improve suspension performance in technical terrain. Built for the bike park with the dynamic, and responsive feel park riding demands, and the grip and support to boost jumps and shrug off deep landings on rough trails.
- Get up to Speed Fast
The suspension design and rider compartment get the Shore moving quickly on run-ins and rollers.
- Durable Design and Easy Maintenance
Frame design, hardware, and component decisions have been made specifically to keep the Shore on the trail for longer - and when maintenance is necessary, it's easy and quick.
- Two Configurations Available
Options include a 200mm dual crown fork or a 180mm single crown fork. Both models are suited to bike park and shuttle laps and feature a DH 7-speed drivetrain.
- Ride Aligned™ Setup Guide
The updated Ride Aligned™ Setup Guide provides comprehensive bike setup recommendations for your Shore tailored to height, weight, and frame size with features to further dial in your setup for your riding style and trails.
$6,299.00
Evolved over decades of freeride innovation, the Shore Park is your ultimate co-pilot on your gravity-fueled days at the bike park. With either a 200mm dual crown or a 180mm single crown fork, the Shore Park easily shrugs off deep landings and eats up rough trails, while retaining the dynamic and responsive feel required to boost jumps and rail berms.
- Long Travel, No Kickback
The Shore is designed around Norco's VPSHP suspension layout that increases the rearward axle path to improve suspension performance in technical terrain. Built for the bike park with the dynamic, and responsive feel park riding demands, and the grip and support to boost jumps and shrug off deep landings on rough trails.
- Get up to Speed Fast
The suspension design and rider compartment get the Shore moving quickly on run-ins and rollers.
- Durable Design and Easy Maintenance
Frame design, hardware, and component decisions have been made specifically to keep the Shore on the trail for longer - and when maintenance is necessary, it's easy and quick.
- Two Configurations Available
Options include a 200mm dual crown fork or a 180mm single crown fork. Both models are suited to bike park and shuttle laps and feature a DH 7-speed drivetrain.
- Ride Aligned™ Setup Guide
The updated Ride Aligned™ Setup Guide provides comprehensive bike setup recommendations for your Shore tailored to height, weight, and frame size with features to further dial in your setup for your riding style and trails.
$4,899.00
$6,499.00
25% Off
The Sight C3 boosts your All-Mountain confidence with incredible descending capability, adept, sure-footed climbing, and efficient pedaling.
To make the Sight Carbon, we had to re-think how you connect with the trail.
With maximum front and rear wheel grip on climbs and descents, Sight C3 maintains momentum and cadence in technical situations and allows the suspension to move freely without absorbing drivetrain energy.
Reasons It's Rad:
- Precise tune and fit perfects every ride.
- Max standover with long travel dropper posts.
- Sweating the little stuff makes the ride better.
- Four piston brakes with 200/180mm rotors.
- Features the Ride Aligned Design System.
Wheel size:
Sizes Small – X-Large: 27.5-inch or 29-inch
$2,549.00
$3,399.00
25% Off
The Optic Frame Kit is the basis for an aggressive short-travel sled that rips on descents and can get back to the top without a gondola.
The Optic sharpens your view on high speed trails. The precision suspension kinematics and custom DH spec shock creates 125mm of rear travel, matched with the 140mm fork of your choice for the control you need to keep your mind on the trail ahead.
Reasons It's Rad
- Fast never felt this fun.
- Designed to work so you can play.
- Components selected with speed on the brain.
- Matching each Optic to the human who rides it.
$5,199.00
Lighten Up
Everything Fluid FS, Now in Carbon
Upping the ante on everybody's favourite Trail rig, the Fluid FS Carbon features a 600g lighter main triangle with all the strength and fine-tuned potential that experienced or evolving riders need.
Right now, and down the trail, too.
- Fluid FS Carbon
- Intended Use: Trail
- Frame Material: Carbon Main, 6061 Alu Stays
- Frame / Wheel Size: S, M, L, XL / 29"
- Suspension Travel – F: 140mm R: 130mm
- Suspension Platform: Horst Link
- Tire Size: 2.35" – 2.6"
Additional Features
- Ride Aligned Design System
- Long Travel Dropper Posts (Up To 200mm)
- Low Standover
- Custom Tuned Rear Shock
- Integrated Accessory Mount
Hero-Thread the Needle
Intuitive, precision handling to pick the perfect line.
- Fluid's geometry, suspension kinematics and precision setup have achieved near-legendary status – so why mess with a success? Fluid Carbon delivers the goods on all types of trails with a little less junk in the trunk.
Hero-Pushing the Envelope
Design & features that'll continue to impress as skills progress.
- Refining the ride and dropping 600 grams from a Trail frame benefits everyone – but only if it's up to the task. The Fluid Carbon aced every test we subjected it to-in the lab, and on the trail.
Hero-Custom Tuned Suspension
Sophisticated suspension components for precision performance.
- Precision-engineered 130mm rear suspension features custom-tuned damping co-developed with shock manufacturers to provide a fully customized suspension setup and performance.
Hero-Room to Move
Long-travel droppers and generous standover get you through the rough stuff.
- Long-travel, size-specific 34.9mm dropper posts, and low-slung top tubes create lots of room to move, letting you roll confidently through challenging terrain.
Hero-You Ask, Fluid Answers
Refined design for ultimate Trail performance.
- With balanced, progressive geometry, kinematics and superior pedal efficiency, Fluid FS Carbon tackles technical terrain with confidence, and attacks high speed pedaling sections with a big ol' grin.
Hero-Ride Aligned
Perfect fit, dialed handling and personalized setup in minutes.
- The Ride Aligned Design System matches each Fluid FS Carbon to the human who rides it. Rider-first geometry and suspension kinematics are precision tuned in minutes with the Ride Aligned Bike Setup Guide.
$6,199.00
Lighten Up
Everything Fluid FS, Now in Carbon
Upping the ante on everybody's favorite Trail rig, the Fluid FS Carbon features a 600g lighter main triangle with all the strength and fine-tuned potential that experienced or evolving riders need.
Right now, and down the trail, too.
- Fluid FS Carbon
- Intended Use: Trail
- Frame Material: Carbon Main, 6061 Alu Stays
- Frame / Wheel Size: S, M, L, XL / 29"
- Suspension Travel – F: 140mm R: 130mm
- Suspension Platform: Horst Link
- Tire Size: 2.35" – 2.6"
Additional Features
- Ride-Aligned Design System
- Long Travel Dropper Posts (Up To 200mm)
- Low Standover
- Custom Tuned Rear Shock
- Integrated Accessory Mount
Hero-Thread the Needle
Intuitive, precision handling to pick the perfect line.
- Fluid's geometry, suspension kinematics, and precision setup have achieved near-legendary status – so why mess with a success? Fluid Carbon delivers the goods on all types of trails with a little less junk in the trunk.
Hero-Pushing the Envelope
Design & features that'll continue to impress as skills progress.
- Refining the ride and dropping 600 grams from a Trail frame benefits everyone – but only if it's up to the task. The Fluid Carbon aced every test we subjected it to in the lab, and on the trail.
Hero-Custom Tuned Suspension
Sophisticated suspension components for precision performance.
- Precision-engineered 130mm rear suspension features custom-tuned damping co-developed with shock manufacturers to provide a fully customized suspension setup and performance.
Hero-Room to Move
Long-travel droppers and generous standover get you through the rough stuff.
- Long-travel, size-specific 34.9mm dropper posts, and low-slung top tubes create lots of room to move, letting you roll confidently through challenging terrain.
Hero-You Ask, Fluid Answers
Refined design for ultimate Trail performance.
- With balanced, progressive geometry, kinematics, and superior pedal efficiency, Fluid FS Carbon tackles technical terrain with confidence, and attacks high-speed pedaling sections with a big ol' grin.
Hero-Ride Aligned
Perfect fit, dialed handling, and personalized setup in minutes.
- The Ride Aligned Design System matches each Fluid FS Carbon to the human who rides it. Rider-first geometry and suspension kinematics are precision tuned in minutes with the Ride Aligned Bike Setup Guide.
$1,719.00
$2,149.00
20% Off
The Torrent's modern features and new progressive All-Mountain design provide stable, agile descending, paired with climbing capability that would make a mountain goat jealous – perfect for any rider looking to bring their trail riding to the next level without the extra expense and complexity of rear suspension, and a new challenge for advanced riders trying to keep themselves honest.
- New 29" 6061 DB Aluminum Torrent Frame
- Progressive All Mountain Hardtail Geometry
- Geo based around 150mm short offset 29" fork
- Gravity Tune with short responsive chainstays
- Slack 64 degree head angle
RIDER BENEFITS:
- PROGRESSIVE DESIGN: The Torrent uses Norco's holistic approach to fit and geometry to create the ultimate all-mountain hardtail experience. The unique combination of our next generation of Gravity Tune, longer reach, slacker head tube angle and steep seat tube angle provides a more forward weight distribution within a longer wheelbase. This allows more powerful pedaling, increased climbing traction and added grip and control when descending so you can confidently attack the rowdiest trails.
- EQUIPPED TO DESCEND: To support riders through the lunacy that the Torrent's inspires, each bike is equipped with 4-piston disc brakes, shorter seat tubes, long-stroke dropper posts and aggressive knobby 29er tires.
- BURLY METAL FRAME: For 2021, we decided to offer the Torrent in both steel and highly-engineered aluminum to give you some options for when you're fully committed to a burly line that you're fairly confident you can pull off. Steel has a reputation for being tough and compliant, and when it's engineered right, aluminum does, too.